A、 If the ambient temperature on the ground is 20℉ (6℃) or lower altitude at an arrival location and a fluid level is below “REFILL”, service the reservoir to much higher than “REFILL” to avoid the overflow of fluid at the next warmer location;
B、 If the arrival location ambient temperature on the ground is 20℉(6℃) or lower and under a condition of fluid level is below “REFILL”, service the reservoir to above “REFILL” just a little to avoid the overflow of fluid at the next warmer location;
C、 If the ambient temperature on the ground is above 20℉ (6℃) or lower altitude at an arrival location and a fluid level is below “REFILL”, service the reservoir to just above “REFILL” to avoid the overflow of fluid at the next warmer location;
答案：B
A、 If the ambient temperature on the ground is 20℉ (6℃) or lower altitude at an arrival location and a fluid level is below “REFILL”, service the reservoir to much higher than “REFILL” to avoid the overflow of fluid at the next warmer location;
B、 If the arrival location ambient temperature on the ground is 20℉(6℃) or lower and under a condition of fluid level is below “REFILL”, service the reservoir to above “REFILL” just a little to avoid the overflow of fluid at the next warmer location;
C、 If the ambient temperature on the ground is above 20℉ (6℃) or lower altitude at an arrival location and a fluid level is below “REFILL”, service the reservoir to just above “REFILL” to avoid the overflow of fluid at the next warmer location;
答案：B
A. If you change this repair procedure, get approval of the Design Authority.
B. Any alteration to this repair procedure must have approval of the Design Authority.
C. To change this repair procedure,get agree of the Design Authority .
A. REVISION-A revision means a modification of information in an existing manual. Appropriate revision pages and related effectivity page lists will be provided when amending the basic document.
B. REVISION-A revision means a modification of information in an existing manual. Appropriate revision pages and related effectivity page lists will be provided when deleting the basic document.
C. REVISION-A revision means a modification of information in an existing manual. Appropriate revision pages and related effectivity page lists will be provided when replenishing the basic document.
A. EJECT
B. SPRAY
C. INJECT
A. Procedures for handling malfunctions or other abnormalities that are not emergent, or potentially emergent may be delayed in this section.
B. This Section may cover procedures for handling malfunctions or other deviations that are not of emergency nature or involve a potential emergency that may be handled later.
C. This Section may cover procedures for handling malfunctions or other deviations that are not emergent or involve a potential emergency that may be deterred.
A. 两个关断螺栓是可调节的。
B. 两个止动螺栓是可校准的。
C. 两个止动螺栓是可调节的。
A. A In the case that a revision to an illustration happens, a black vertical line or a black hand need not be used to focus on the changed part.
B. If an illustration is to be revised, you may use a black vertical line or a black hand to draw attention to the modified part.
C. A black vertical line or a black hand ought not to be utilized to revise the illustration and draw attention to the changed part.
A. The Boeing-777 airplanes are different from the previous Boeing series ones mainly in that they are flown by wires.
B. The difference between the Boeing-777airplanes and the subsequent Boeing series is that they are operated by wires.
C. Fly-by-wire is the main difference between Boeing-777 airplanes and the subsequent Boeing series.
A. Text may be prepared in one or two columns with or without justification.
B. Text may be prepared in one and two columns with or without reason.
C. Text may be prepared in one or three columns wit or without justification.
A. As a general rule, a reissue shall be prepared when a minor number of the total pages of the manual is affected.
B. As a general rule, a revision shall be prepared when a minor number of the total pages of the manual is affected.
C. As a general rule, a reissue shall be prepared when a minor affect of the total number pages of the manual is minor.
A. 保持安静以避免错过信号的声音。
B. 保持安静以避免混淆声音的信号
C. 保持安静以避免丢失声音信号。
