A、 The SMYD 1 will limit rudder movement when flaps are up if trailing edge flaps receive data; from up limit switch of SMYD 1 during yaw damping.
B、 The SMYD 1 will limit rudder movement after receiving date from up limit switch of trailing edge flaps during yaw damping when flaps are up.
C、 The SMYD 1 will limit yaw camping to reduce rudder movement when flaps are up if trailing edge flaps receive data from up limit switch of SMYD 1.
答案：B
A、 The SMYD 1 will limit rudder movement when flaps are up if trailing edge flaps receive data; from up limit switch of SMYD 1 during yaw damping.
B、 The SMYD 1 will limit rudder movement after receiving date from up limit switch of trailing edge flaps during yaw damping when flaps are up.
C、 The SMYD 1 will limit yaw camping to reduce rudder movement when flaps are up if trailing edge flaps receive data from up limit switch of SMYD 1.
答案：B
A. 通过侧面油箱的门获取控制组件。
B. 通过侧面油箱的孔触摸控制组件。
C. 通过油箱侧面的开口接近控制组件。
A. To give indications and test to the wing/body overheat system, 115v ac power must be connected. When installing an element, do not bend the element unless the bend radius is less than one inch. If the bend radius is less than one inch, damage to the element can occur.
B. For the indications and test of the wing/body overheat system, 115v ac power must be ON. When you install an element,do not bend the element until the bend radius is less than one inch. If the bend radius is less than one inch, damage to the element can occur.
C. 115v dc power must be supplied for the indications and test of the wing/body overheat system. When you install an element, do not bend the element radius less than one inch. If you bend the radius less than one inch, damage to the element can occur.
A. Those units and components which furnish a means of pressurizing, heating, cooling, moisture controlling, strainer and treating the air used to ventilate the areas of the fuselage within the pressure seals, as applicable.
B. Those units and components which furnish meaning pressurizing, heating, cooling, moisture control, filter and treating the air used to ventilate the areas of the fuselage within the pressure seals, as applicable.
C. Those units and components which furnish a means of pressurizing, heating, cooling, moisture controlling, filtering and treating the air used to ventilate the areas of the fuselage within the pressure seals, as applicable.
A. Perform check to see if there are traces of corrosion around the drain holes.
B. Check the drain holes for signs of corrosion.
C. Check the area surrounding the drain holes for signs of contamination.
A. 轮毂
B. 轮轴
C. 轮胎
A. 安装排放活门和正确的封严。
B. 安装排放活门和正确的垫圈。
C. 安装排放活门和正确的卡箍。
A. Under each section, in order of probability, list the unit conditions that may be causing the trouble.
B. Under each section, list the possible causes of the problem by rank of failure.
C. Under each section, list each condition causing the problem, in the order in which the part works.
A. 径向施加载荷
B. 轴向施加载荷
C. 横向施加载荷
A. 发动机分析仪的功能是通过示波器等仪表或设备分析发动机性能或状态。
B. 发动机分析系统使用传感器等仪器或设备采集数据并应用于发动机性能或状态分析。
C. 发动机分析系统被用于分析发动机性能或状态, 以供示波器等仪表或设备使用。
A. 设备清单上的项目可以按项目编号进行识别并按逻辑分组,使用诸如“螺旋桨和螺旋桨附件”,“发动机和发动机附件”,“起落架”,“电气设备”,“内部设备”,“自动驾驶”等标题。
B. 设备清单上的项目可以通过序列号表示,并进行逻辑排列使用的标题可以是“螺旋桨和螺旋桨附件”,“发动机和发动机附件”,“起落架”,“电气设备”,“外部设备”,“自动驾驶”等
C. 设备清单上的项目可以通过使用诸如“螺旋桨和螺旋桨附件”,“发动机和发动机附件”,“起落架”,“电气设备”,“外部设备”,“自动驾驶”等标题来进行序列编号标识以及逻辑分组。
