A、 Identify the disassembled parts with tags;
B、 Locate the disassembled parts with tags;
C、 Note the disassembled parts with tags;
答案:A
A、 Identify the disassembled parts with tags;
B、 Locate the disassembled parts with tags;
C、 Note the disassembled parts with tags;
答案:A
A. Adjust the clearance dimension between the extend proximity sensor[1A] and the target[1C] until the clearance dimension is out of range. Some of the ducts in the air distribution system are wrapped with compound material.
B. Adjust the clearance dimension between the extend proximity sensor[1A] and the target[1C] in case of the clearance dimension is out of tolerance. Some of the ducts in the air distribution system are wrapped with non-conductive material.
C. If the clearance dimension is not accurate,adjust the clearance dimension between the extend proximity sensor[1A] and the target[1C]. Some of the ducts in the air distribution system are wrapped with insulation material.
A. 在材料表面使用工具(涂抹)使部件变得柔软。
B. 在溶液中使用工具(搅拌)使化合物变得柔软。
C. 在溶剂中使用工具(搅拌)使化合物变得柔软。
A. 使用力矩扳手间隔拧紧螺栓。
B. 使用扭力扳手按顺序拧紧螺栓。
C. 使用扭矩扳手逐步拧紧螺栓。
A. 驾驶舱从左侧空调组件获得空调空气,并在总管里混合。
B. 驾驶舱从左侧空调组件和混气总管获得空调空气。
C. 驾驶舱从左侧空调组件和混合总管获得增压空气。
A. Three computers collect data and put them together on the data link to the display unit.
B. Three computers collect data and put them together on the data upload to the display unit
C. Three computers collect data and put them together on the data conveyed to the display unit.
A. Each manufacturer is expected to abide by the Specification content and arrangement without any deviation in order to reasonably achieve the objectives of this Specification (enhance safety, reduce efforts, minimize costs).
B. It is mandatory that each manufacturer adhere to the Specification content and arrangement to achieve the objectives of this Specification (enhance safety, reduce efforts, minimize costs).
C. Each manufacturer, is expected to adhere to the Specification content and arrangement reasonably so as to enhance safety, reduce efforts, and minimize costs which are the objectives of this Specification.
A. 空气流经立管并向上至侧壁和头顶分配导管。
B. 空气通过立管和上方管壁流入头顶交输总管。
C. 空气通过立管和上方侧壁流入头顶分配导管。
A. That portion of the system which provides guidance during takeoff, landing and taxing. Includes items such as localizer, glide slope, ILS, markers, eye director, ground guidance systems, etc.
B. That portion of the system which provides guidance during approach, landing and taxing. Includes items such as localizer, glide slope, ILS, markers, paravisual director, ground guidance systems, etc.
C. That portion of the system which provides guidance during takeoff, landing and taxing. Includes items such as localizer, glide slope, ILS, markers, paravisual director, ground guidance systems, etc.
A. 温度传感器监控环境温度。
B. 温度传感器监控高温。
C. 温度计指示环境温度。
A. 你需要在安装发动机时更换大量零件。
B. 更换发动机时,你可以安装大量部件。
C. 在发动机安装时可能更换大量部件。