437. The manufacturer＇s masthead, publication title, aircraft model and issue and revision dates or codes shall appear on all pages that contain text or illustrations However, aircraft model number should not be included in engine maintenance manuals

A. Make sure that the arrow on the check valve is distant from the ground air supply line;

B. Make sure that the arrow on the relief valve stays away from the ground air supply line;

C. Make sure that the arrow on the check valve points away from the ground air supply duct;

A. The Specification was produced with the purpose to add the cost to,and efforts of ,general aviation airplane owners and operators and maintenance personnel by standardizing the format and general content of Continuing Airworthiness Programs.

B. The purpose of the Specification is to minimize the cost and efforts general aviation airplane owners and operators and maintenance personnel by the way of standardizing the format and general content of Continuing Airworthiness Programs.

C. The Specification was developed with the objective of minimizing the cost to ,and efforts of ,general aviation airplane owners and operators and maintenance personnel by standardizing the format and general content of Continusing Airworthiness Programs.

A. The safety procedures are supplied by the manufacturer.

B. Safety procedures are to be supplied to the manufacturer.

C. Safety procedures are provided for manufacturers to follow.

A. LIGHTS

B. COMES IN

C. COMES ON

A. 当A导体穿过南极时,诱导电压沿正方向逐渐增加,直到达到图中所示的位置。

B. 当A导体穿过南极时,安全电压沿磁方向渐增加,直到达到图中所示的位置。

C. 当A导体穿过南极时,感应电压沿负方向逐渐增加,直到达到图中所示的位置。

A. ACCESS

B. NEAR

C. CLOSE

A. In STE, a unit started with “topic sentence” is to instruct the main topic.

B. The “topic sentence” starts to tell the readers the topic of the paragraph in SET.

C. In STE, a paragraph starts with a “topic sentence” which tells the reader what the topic of that paragraph is.

A. The SMYD 1 will limit rudder movement when flaps are up if trailing edge flaps receive data; from up limit switch of SMYD 1 during yaw damping.

B. The SMYD 1 will limit rudder movement after receiving date from up limit switch of trailing edge flaps during yaw damping when flaps are up.

C. The SMYD 1 will limit yaw camping to reduce rudder movement when flaps are up if trailing edge flaps receive data from up limit switch of SMYD 1.

A. was not; was

B. does not; are

C. did not; was

A. If you change this repair procedure, get approval of the Design Authority.

B. Any alteration to this repair procedure must have approval of the Design Authority.

C. To change this repair procedure,get agree of the Design Authority .