A、 Make sure that the indicated value is correct.
B、 Make sure that the value shown on the controller is right.
C、 Make sure that the value shown on the indicator is correct.
答案：C
A、 Make sure that the indicated value is correct.
B、 Make sure that the value shown on the controller is right.
C、 Make sure that the value shown on the indicator is correct.
答案：C
A. The forward and aft edges of the windshield has limits, otherwise the bottom and the top edge has not limits.
B. Because of the visibility of the bottom edge of the windshield and the top edge having the bus bar in the way, the forward and aft edges of the windshield will be limited.
C. This will be limited to the forward and aft edges of the windshield because of the bottom edge invisible and the top edge having the bus bar in the way.
A. Sometimes FAA and other airworthiness authority may accept the Continuing Airworthiness Program that uses the Specification.
B. Sometimes we use the Specification to prepare a Continuing Airworthiness Program that will be accepted by non-FAA airworthiness authority.
C. Sometimes during preparing a Continuing Airworthiness Program, using the Specification may be accepted by FAA and other airworthiness authority.
A. 保持相同的空速值至少2分钟。
B. 保持相同的空速指示2分钟。
C. 保持相同的飞行速度指示2分钟。
A. Place an open end of a tube on each plug.
B. Put a plug on the open end of each pipe.
C. Place a plug on each pipe with an open end.
A. Maximum altitude loss during stall recovery is approximately 800 feet.
B. Maximum altimeter loss during spin recovery is about 800 feet.
C. Maximum weight loss during stall recovery is nearly 800 feet.
A. Retract the ram air turbine manually.
B. A The ram air turbine can be pushed to the retracted position manually.
C. Push the ram air turbine with your hands in the direction that the turbine retracted.
A. Get a sample of hydraulic fluid.
B. Scavenge the hydraulic fluid.
C. Service the hydraulic reservoirs.
A. All pages of each each-size fixed-leaf manuals shall be set up for standard fixed-leaf filing.
B. All pages of each semi-size loose-leaf manuals shall be set up for standard loose-leaf filing.
C. All pages of each full-size loose-leaf manuals shall be set up for standard loose-leaf filing.
A. Clean the mask assembly with antiseptic.
B. Clean the mask assembly with disinfectant.
C. Cleanse the mask assembly with detergent.
A. You do not need to give the return processes in its entirety unless you need to comprehend the system.
B. Unless you need to comprehend the system,do not need to fully show the return lines.
C. Return lines need not be shown completely if the system need not be realized.
