A、 Be careful not to cause damage to the sleeve.
B、 Be careful not to damage the sleeve.
C、 Be careful don't damage the sleeve.
答案:A
A、 Be careful not to cause damage to the sleeve.
B、 Be careful not to damage the sleeve.
C、 Be careful don't damage the sleeve.
答案:A
A. Attach the screw's wire to the new cable.
B. Attach the screw's cord to the new cable.
C. Attach the threading cord to the new cable.
A. Rapid operation of the accelerometer can cause unexpected movement of the vertical stabilizer.
B. Accidental movement of the compass can cause unwanted operation of the oriental stabilizer.
C. Sudden operation of the gyro can cause unwanted movement of the horizontal stabilizer.
A. Tell all personnel to go away from the area.
B. Alert personnel to leave area.
C. Tell all person to leave the area.
A. 当朝下时,盖子起到保护开关的作用
B. 当朝下时,盖子作为开关的一种保护
C. 当打开时,盖子就起到保护开关的作用
A. The tension in the cables increases if the temperature decreases.
B. The tension in the cables decreases if the temperature increases.
C. The torsion in the cables decreases if the temperature increases.
A. In this configuration, we required a same test procedure.
B. This configuration demands a different test procedure.
C. In this configuration, a different test procedure is required or not.
A. Disconnect the connection. This connection is downstream of the valve.
B. Disconnect the connection. The valve is downstream of the connection.
C. Disconnect the valve. The valve is downstream of the connection.
A. INCLUDE
B. INCLUDES
C. INCLUDING
A. In “Restricted Area B”, where satisfactory working condition is available and approved by Airframe Manufacturer, the operator is required to perform repairs based on the procedures contained in related chapters of the SRM.
B. In “Restricted Area B”, when conducting repairs as required, the operator can either obey procedures in relevant chapters of the SRM, or apply his own solution approved by Airframe Manufacturer beforehand.
C. If it is required to perform repairs in “Restricted Area B”, the operator should consult the SRM for specific procedures in related chapters rather than his own solution even though prior Airframe Manufacturer's approval is obtained.
A. Use the specified one if the equivalent material is not available.
B. Use the available equivalent one if no material is specified.
C. If you can not get the specified material, use an equivalent.