A、 If the airframe manufacturer modifies the component manufacturer＇s text or description by any means, he shall use his own headmaster.
B、 If the airframe manufacturer changes the component manufacturer＇s text or illustration in any way, he shall apply his own masthead.
C、 If the airframe manufacturer changes the component manufacturer＇s text or illustration in one way, he shall modify his own masthead.
答案：B
A、 If the airframe manufacturer modifies the component manufacturer＇s text or description by any means, he shall use his own headmaster.
B、 If the airframe manufacturer changes the component manufacturer＇s text or illustration in any way, he shall apply his own masthead.
C、 If the airframe manufacturer changes the component manufacturer＇s text or illustration in one way, he shall modify his own masthead.
答案：B
A. 选择适用的垫圈,确定恰当的尺寸。
B. 挑选适用的调整片以确保厚度合适。
C. 从可用的垫片中进行选择,以获得正确的厚度。
A. This section includes all the fuel consumption information for the pilot to use during the flight and landing.
B. In this section, the pilot can find the recommending fuel saving information to use during takeoff and flight.
C. The recommended fuel conservation information shall be integrated into this section to show the pilot how to minimize the fuel usage during the operation of the airplane.
A. The procedures should give the address of the facility and time the program will be rechecked to find out if it is coherent enough for the type of maintenance being performed at the facility.
B. The program shall be checked to decide if it is updated and sufficient for the type of maintenance being performed at the facility. The interval of the checks shall be stated in this procedure.
C. The program will not be performed at the facility if this procedure shows outdated and inadequacy information for the type of maintenance.
A. 当启动发动机之前,解除离合器。
B. 当启动发动机之前,先断开刹车。
C. 当启动发动机之前,解除推力器。
A. These procedures are applied to the nose landing gear only when maintained;
B. These procedures are used to maintain the main landing gear only;
C. These maintenance procedures are applicable to the main landing gear only;
A. SUPPLYS
B. RECEIVES
C. ACCEPTS
A. 可以使用单独的图案描影来识别供给,压力,回流等。
B. 应使用不同的图案描影来区分供给,压力,回流等。
C. 必须使用单独的阴影图案来标记供给,压力,回流等。
A. This handbook includes the documents required to be finished to the pilot by the federal aviation regulations and additional information approved by the operator and contains the FAA approved airplane flight manual.
B. This handbook includes the material required to be furnished to the pilot by the federal aviation regulations and additional information provided by the manufacturer and constitutes the FAA approved airplane flight manual.
C. This handbook includes requirements of federal aviation regulations,material provided to pilots and accurate information provided by the manufaactures,and establishes the FAA approved airplane flight manual.
A. If the filters become clogged after an unusually short time, send them to the laboratory for analysis of the contamination.
B. When the filters become clogged in an abnormal short time, send them to the library to analyze the contamination.
C. When the filters become blocked unconventionally after a very short time, send them to the lab for calculation of the contamination.
A. Using the wet wing concept, all fuel is stored in three tanks. These three tanks include main tank1, main tank 2 and center tank. Center tanks are made up of the main wing structure.
B. Using the wet wing concept,all fuel is stored in three tanks. These three tanks include main tank 1, main tank 2 and center tank. These three tanks are made up of the main wing structure.
C. Using the wet wing concept,all fuel is stored in three tanks. These three tanks include main tank1, main tank 2 and center tank. The primary wing structure consists of main tank 2 and center tank.
