A、 For vocabulary, only main alternation are highlighted, minor alternations to many approved and not approved examples are not highlighted.
B、 For wordlist, only major changes are highlighted, minor changes to various approved and not approved examples are not highlighted.
C、 For vocabulary, only main alternation are prominent, minor alternations to many approved and not approved examples are not prominent.
答案：B
A、 For vocabulary, only main alternation are highlighted, minor alternations to many approved and not approved examples are not highlighted.
B、 For wordlist, only major changes are highlighted, minor changes to various approved and not approved examples are not highlighted.
C、 For vocabulary, only main alternation are prominent, minor alternations to many approved and not approved examples are not prominent.
答案：B
A. Set the LAT" knob to the local latitude."
B. Set theALT" knob to the local altitude."
C. Set the ATT" knob to the local attitude."
A. Adjust the door operating rod until it aligns with the attachment point.
B. Adjust to obtain door operating rod alignment point.
C. Adjust to make the door align with the attachment point.
A. Before drilling the hole, make sure that the point of the drill head is sharp.
B. Prior to drilling the hole, make sure that the point of the drill bit is sharp.
C. Before you make the hole, make sure that the point of the drill bit is sharp.
A. Connect the multimeter to the current measuring transformer.
B. Connect the multimeter to the output of the current measuring inductor.
C. Connect the amperemeter to the output of the current measuring meter.
A. It is urgent to establish the thorough maintenance procedure after designed and approved.
B. Once designed and approved, scheduled maintenance procedures must be built.
C. Once designed and approved, complete maintenance procedures must be set.
A. RESET测试电门用于减少故障历史。当VERFIY(通过)和绿色GO灯亮时,按下RESET(复位)电门。
B. RESET测试电门用于转移故障记录。当VERFIY(验证)和绿色GO灯打开时,按下RESET(复位)电门。
C. RESET测试电门用于消除故障记录。当VERFIY(确认)和绿色GO灯亮时,按下RESET(复位)电门。
A. If the pressure is above the limits, pressurize the accumulator of the door damper.
B. If the pressure is not in the given limits, pressure the cylinder of the door damper.
C. If the pressure is not in the given limits, pressurize the accumulator of the door damper.
A. 力矩乘以常数用于减少位数,从而简化平衡计算。
B. 力矩除以常数用于减少位数,从而优化平衡化简。
C. 力矩除以常数用于减少位数,从而简化平衡计算。
A. symbol
B. label
C. mark
A. The thickness of the second coating layer must be 0.5mm and 0.6mm.
B. The coating thickness must be more than 0.5mm and less than 0.6mm.
C. The thickness of primer layer must be between 0.5 mm and 0.6 mm.
