A、 Attach the cable to the structurewith wire;
B、 Make the wire and cable parallel to the structure;
C、 Connect the wire of the cable to the structure;
答案:A
A、 Attach the cable to the structurewith wire;
B、 Make the wire and cable parallel to the structure;
C、 Connect the wire of the cable to the structure;
答案:A
A. keep the cable hit the floor and make sure the floor is dry
B. Let the cable above the floor and assure the floor is moist
C. Do not let the cable touch the floor and make sure the floor is not moist
A. The air Inlet Section is adjacent to the compressor section. Includes guide vanes, shrouds, cases, etc.
B. After the air goes through the air Inlet Section, it enters the turbine section
C. The compressor section includes items such as inlet guide vanes, shrouds, cases, etc.
A. Each Chapter or Section is begin with either a general description of the system or its operation and Description and Operation should be labeled.
B. Each Chapter or Section is begin with neither a general description of the system nor its operation and Description and Operation should be labeled.
C. Description and Operation should be labeled in each Chapter or Section which is open with both a general description of the system and its operation.
A. Entrance stairs or step are connected with entrance doors and move accordingly.
B. Entrance stairs or step are integrated with entrance doors and operate together.
C. Although entrance stairs or step operate together with entrance doors,they are not integrated.
A. control
B. continue
C. contents
A. 拆除部件之前,给系统充气
B. 安装部件之前,给系统释压
C. 断开部件之前,给系统放气
A. 拆卸一个螺栓。
B. 拆卸四个螺栓。
C. 拆卸四个螺栓中的一个。
A. 制定本规范的目的是为了降低成本
B. 本规范是为减少失误而制定的
C. 规范的制定是为了发展航空安全
A. Sometimes you have to change long sentences to shorter ones, remove unnecessary information, or ask an engineer to get further explanation.
B. Some time you have to incorporate long sentences into shorter ones, decrease unnecessary information, or require an engineer for further instruction.
C. Sometime you must illuminate long sentences into shorter ones, ignore information which is not necessary, or order an engineer for further definition.
A. Make sure that the load on the jacks is not more than the maximum load special in this procedure.
B. Make sure that the load on the jacks is not more than the maximum load specified in this procedure.
C. Make sure that the load on the springs is not more than the maximum load specified in this procedure.