584. If there is no contamination in the fuel sample, continue the procedure

A. Used to induce and convert fuel into power

B. Used to induce and convert fuel-air mixture into power

C. Used to make fuel-air mixture into power

A. 探头的颜色变为绿色

B. 指示器的颜色变为绿色

C. 显示器的颜色变为绿色

A. Apply fuel to the steel surfaces.

B. Apply oil to the alloy surfaces.

C. Apply oil to the steel surfaces

A. Continuing Airworthiness Program Inspection Number; Airplane Model and Serial Number; Airplane Hours; Title of Continuing Airworthiness Program Inspection; Location and Description of the Damage and How Detected should be included in the CAP report;

B. The report of discrepancy should contain the following: Continuing Airworthiness Program Inspection Number; Airplane Model and Serial Number; Airplane Hours; Heading of Continuing Airworthiness Program Inspection; Location and Description of the Damage; Detecting ways;

C. The discrepancy report should cover the information other than the following: Continuing Airworthiness Program Inspection Number; Airplane Model and Serial Number; Airplane Hours; Title of Continuing Airworthiness Program Inspection; Location and Description of the Damage; How Detected;

A. 根据结构修理手册进行永久性修理,对损伤部位填充BMS-287填充剂。

B. 根据故障修理手册进行恢复性修理,对损伤部位填充BMS-287填充剂。

C. 根据勤务手册进行翻新修理,对损伤部位填充BMS-287填充剂。

A. 刹车和转弯控制组件的电子性能可实现一定程度的自我诊断。

B. 刹车和转弯控制组件的电子性能可实现一定程度的自我校准。

C. 刹车和转弯控制组件的电子性能可实现一定程度的自我修复。

A. Turn the repair patch align the surface structure and mark the cut out.

B. Rotate the repair patch to mark the incision for repair.

C. Open the repair picture to align the structural surface and mark the cut out.

A. 机身站位360处的地板梁有低度腐蚀(长2英寸,直径1英寸)。

B. 机身站位360处的地板梁有重度腐蚀(长2英寸,半径1英寸)。

C. 机身站位360处的地板梁有中度腐蚀(长2英寸,直径1英寸)。

A. It is very difficult to determine the effects of corrosion but, as the reports from the CAP inspections are received, the inspection times will be adjusted for any severe problems.

B. It is not easy to decide the affection of corrosion, when the reports from the CAP inspections are received, the inspection duration will be changed for any serious problems.

C. It is very hard to make the decision of the corrosion effects but, if the reports from the CAP inspections are obtained, the inspection times will be arranged in accordance with the severest problem.

A. A In the case that a revision to an illustration happens, a black vertical line or a black hand need not be used to focus on the changed part.

B. If an illustration is to be revised, you may use a black vertical line or a black hand to draw attention to the modified part.

C. A black vertical line or a black hand ought not to be utilized to revise the illustration and draw attention to the changed part.