A、 系统中向座舱提供压缩空气的部分及其控制装置。包括与涡轮相关的控制和指示系统等项目,如适用。不包括客舱增压的压力控制和指示系统。
B、 系统中向座舱提供压缩空气的部分及其控制装置。包括与压气机相关的控制和警告系统等项目,如适用。包括客舱增压的压力控制和指示系统。
C、 系统中向座舱提供压缩空气的部分及其控制装置。包括与压气机相关的控制和指示系统等项目,如适用。不包括客舱增压的压力控制和指示系统。
答案:C
A、 系统中向座舱提供压缩空气的部分及其控制装置。包括与涡轮相关的控制和指示系统等项目,如适用。不包括客舱增压的压力控制和指示系统。
B、 系统中向座舱提供压缩空气的部分及其控制装置。包括与压气机相关的控制和警告系统等项目,如适用。包括客舱增压的压力控制和指示系统。
C、 系统中向座舱提供压缩空气的部分及其控制装置。包括与压气机相关的控制和指示系统等项目,如适用。不包括客舱增压的压力控制和指示系统。
答案:C
A. 该扭力无法向内侧旋转,因此在拆下前,应先拆下外旋扭力轴。
B. 禁止将该扭力轴向内侧移动。因此,在拆下前,应先拆下外侧扭力轴。
C. 该扭力轴不能向内侧移动,因此在拆下之前,应先拆下外侧扭力轴。
A. Measure the time necessary for the silica gel to decrease the moisture.
B. Check the time necessary for the silica gel to increase the moisture.
C. Measure the time necessary for the silica gel to absorb the moisture.
A. Tire wear increases with high speed.
B. The higher the speed is, the more fragile the tire becomes.
C. The tire blows out as the speed increases.
A. If you have no doubt about the serviceability of the unit perform a standard serviceability test.
B. If you have no knowledge about the serviceability of the unit do a standard serviceability test.
C. If there are doubts about the serviceability of the unit, carry out a standard serviceability test.
A. If the engine appears to be heating, turn it off.
B. If the engine appears to be overheating, turn it off.
C. If you think the engine is too hot, turn the switch to off"'"
A. 在线路上再安装多个垫圈。
B. 在管道上再安装多个垫圈。
C. 在管道上再安装多个螺栓。
A. Put down a face mask and protective clothing.
B. Put on a face goggle and protective clothing.
C. Put on a face mask and protective clothing.
A. CHECK THE CASTING FOR CORROSION
B. EXAMINE THE CASTING FOR CORROSION
C. MEASURE THE CASTING FOR CORROSION
A. The section of the engine which contains the propeller shafts and reduction gears. Includes items such as drives for nose mounted accessories, etc.
B. The section of the engine which contains the propeller shafts and reduction gears. Excludes items such as drives for nose mounted accessories, etc.
C. The section of the engine which contains the propeller shafts and engine gears. Includes drives for nose mounted accessories, etc.
A. The oil supply element and the three magnetic particle testing detectors are in the lubrication unit.
B. The oil supply filter and the three chip detectors are in the lubrication unit.
C. Position the oil supply filter assembly and the three magnetic chip detectors in the lubrication unit.