782. The title shall be Airplane Maintenance Manual if all technical data is included

A. Do external inspection for the lower fuselage.

B. Check the exterior of the lower fuselage.

C. Inspect the exterior of the lowest fuselage.

A. 此外,所有手册的序言将醒目地显示以下声明:“这本手册包含FAR___部要求的维修信息”(根据需要插入23或25部)。

B. 此外,所有手册的附录上醒目地显示以下声明:“这本手册包含FAR___部要求的操作信息”(根据需要插入23或25部)。

C. 此外,所有手册的封面将在封面上醒目地显示以下声明:“这本手册包含FAR___部要求的维修信息” (根据需要插入23或25部)。

A. Get medical aid immediately unless you get the solvent in your eyes.

B. Get medical aid immediately provided you get the compound in your eyes.

C. If you get the solution in your eyes, get medical aid immediately.

A. After the system is pressurized, the elevators will drop down no matter where the rigging pin is installed.

B. Without the rigging pin, the elevators will go down when there is no pressure in the system.

C. The rigging pin can prevent the elevators from retracting and expanding when the system is de-energized.

A. 这个能使推力管理更好,并且能够减少燃油吸收。

B. 这个能使更好的推力被应用,并且能够减少燃油消耗。

C. 这个能使推力管理更好,并且能够减少燃油消耗。

A. 由于交付后对飞机进行了改装而需要对维护手册进行的任何修订,都是由变更的型号设计批准持有人负责的,适用于型号认证。

B. 由于交付后对飞机进行了变更而需要对维护手册进行的任何修订,都是由变更的型号设计批准持有人负责的,适用于型号认证。

C. 由于交付后对飞机进行了变更而需要对维护手册进行的任何更新,都是由变更的型号设计批准持有人负责的,适用于型号认证。

A. 本部分应包含一个建议,为了获得服务和信息,经销商或有证书的服务站应与飞机运营商建立沟通。

B. 此章节讲述了为获得勤务信息,经销商或有投权的服务站应与飞机运营商建立相互联系和沟通。

C. 本节应建议飞机运营商与经销商或认证服务站建立联系,以获得服务和信息。

A. The pilot must manually start this deflation cycle;

B. The pilot must automatically start this deflation cycle;

C. The pilot must manually start this inflation cycle;

A. Comparing with the chemical oxygen-generating systems when providing oxygen to the same amount of people,the gaseous oxygen systems are lighter and smaller.

B. When providing oxygen to the same number of people,compared with the gaseous oxygen systems,chemical oxygen-generating systems need less space and have lighter weight.

C. Gaseous oxygen systems have lighter weight and bigger size than chemical-generating systems when supplying air to the same number of people.

A. 根据标准施工手册及结构修理手册里文件的要求除去划痕。

B. 根据标准施工手册及结构修理手册的要求用轮挫磨去毛刺。

C. 根据标准施工手册及结构修理手册的程序除去杂质。