876. However, this operation is recommended to decrease the drying time

A. Do this procedure again.

B. Repeat this procedure.

C. Do this procedure two times.

A. The Height and Resolve Height data are shown on the primary flight unit, The Multi function Control and Display unit can be select and read the Resolve Height.

B. The Height and Absolute Height data are displays on the primary flight display, The Multipurpose Control and Display unit can be choose and read the Absolute Height.

C. The Height and Decision Height data are shown on the primary flight display, The Multipurpose Control and Display unit can be select and read the Decision Height.

A. 用一块布沿钢索摩擦,以发现损伤。

B. 要找出电线上的损伤,用一块布在上面擦一擦。

C. 用布擦干净导线以发现损伤。

A. Use white paper with good strength characteristics and of sufficient weight and substance to eliminate excessive show through when printed on both sides.

B. Use white paper with good strength characteristics and enough weight and substance to eliminate excessive show through when printed on both sides.

C. Use white paper with good hardness characteristics and sufficient weight and quality to eliminate perspective display during double-sided printing.

A. 确保该区域的设备都清空了。

B. 确保该区域的设备都清洁了。

C. 确保该区域那一台设备是完好的。

A. The tension in the cables increases if the temperature decreases.

B. The tension in the cables decreases if the temperature increases.

C. The torsion in the cables decreases if the temperature increases.

A. Vent pressure

B. Let pressure free

C. Make pressure down

A. to arrive at the incorrect value, set the switch to position 2

B. to get the correct value, set the switch to position 2

C. to get the incorrect value, set the switch to position 2

A. 在要断开/卸下的零件上做匹配标记,以记录其连接/位置。这对于后续安装过程很重要。

B. 在要断开/卸下的组件上做匹配标记,以记录其连接/位置。这对于后续安装过程很重要。

C. 在要断开/卸下的组件上做匹配标记,以判断其连接/位置。这对于后续安装过程很重要。

A. A maximum distance of 50 feet is required between consumable materials and the work area.

B. Keep flammable materials at a minimum distance of 50 feet from the work area.

C. Explosive materials must be kept at least 50 feet away from the work area.