A、 ADVISE
B、 SUGGEST
C、 RECOMMEND
答案：C
A、 ADVISE
B、 SUGGEST
C、 RECOMMEND
答案：C
A. Hoist the outflow valve toggle switch in the OPEN position until the outflow valve position indicator shows FULL OPEN.
B. Hoist the outflow valve trigger switch in the OPEN position until the outflow valve position indicator shows FULL OPEN.
C. Hold the outflow valve toggle switch in the OPEN position until the outflow valve position indicator shows FULL OPEN.
A. The fuselage is a semi-monocoque structure
B. The fuselage is a demi-plate.
C. The airframe is of half-shell structure.
A. 手册建议你在气流良好的区域制备混合物。
B. 制造商建议你在气流良好的区域制备混合物。
C. 制造商强调你在气流良好的区域制备混合物。
A. Outside Air Temperature is the free air static temperature, obtained either from inflight temperature indications or ground meteorological sources, a adjusted for instrument error and compressibility effects.
B. Outdoor Air Temperature is the dynamic temperature of free air, obtained from flight temperature indications or ground meteorological sources and adjusted for instrumental error and compressibility effects.
C. Outdoor Air Temperature is free air stagnation temperature, from fight temperature indicating or ground meteorological resource, and according to the instrument error and compressibility effects to adjust.
A. Fueling can be accomplished only by use of a pressure fueling station and in this way all tanks will be partially or completely filled.
B. Fueling can be completed through a single pressure fueling station, and with this station, all tanks can be filled in different level.
C. Fueling can be completed by use of a separate pressure fueling station by which all tanks can be filled continuously or completely.
A. The approved words were chosen because they are as simple as to be recognized.
B. If the words are difficult and hard to identify, they may not be selected as the approved words.
C. Simplicity and legibility are the main features of the approved words.
A. Auxiliary structure: Includes leading edge, trailing edge, wing tip, tip tank, and fuel or water Compartment back panel. Excludes mask/skin.
B. Auxiliary structure: Includes leading edge, trailing edge, wing rib, wing rib tank, and fuel or water Compartment back panel. Does not include plates/skin.
C. Auxiliary Structure: Includes leading edge, trailing edge, wing tip, tip fuel tank and fuel or water cell backing boards. Does not include plates/skin.
A. The Systems are also used to sections of a manual.
B. The Systems are also knowned to sections of a manual.
C. The Systems are also known as Chapters of a manual.
A. The relationship of manufacturer to existing inspection programs is included in the CAP Objectives Statement, as well as information on expectations of CAPs objectives.
B. The Objectives Statement covers CAPs relationship to existing inspection projects, as well as information of manufacturers target about the CAP.
C. The manufacturers Objectives Statement includes information about the CAPs relationship to existing inspection programs and goals for the CAP.
A. Before removing the outboard torque shaft, this torque shaft can move inboard.
B. If you remove the outboard torque shaft first, this torque shaft can move inboard.
C. After this torque shaft moves inboard,remove the outboard torque shaft.
