A、 可以通过使用抹布沿钢索擦拭的方法,实现对钢索关键疲劳区域的仔细检查。
B、 可以通过沿电缆缠绕碎布的方式来对电缆关键疲劳区域进行仔细检查。
C、 在钢索严重疲劳区域进行近距离检查,可沿钢索用棉布清洁。
答案:A
A、 可以通过使用抹布沿钢索擦拭的方法,实现对钢索关键疲劳区域的仔细检查。
B、 可以通过沿电缆缠绕碎布的方式来对电缆关键疲劳区域进行仔细检查。
C、 在钢索严重疲劳区域进行近距离检查,可沿钢索用棉布清洁。
答案:A
A. This test procedure is compatible without the correct equipment;
B. This test procedure is complicated without the correct equipment;
C. This test procedure is comprehensive without the correct equipment;
A. 所有在此区域人员必须使用护目镜。
B. 所有在此区域人员必须使用防护服。
C. 所有在此区域人员必须使用呼吸设备。
A. If you get a minimum clearance of 0.1 in.,you can adjust the length of the rod.
B. Do not adjust the length of the rod unless you get a minimum clearance of 0.1 in.
C. Adjust the length of the rod until the minimum clearance is 0.1 in.
A. If an aileron or spoiler surface failed, the laws are reconfigured to keep the load alleviation capability.
B. If an aileron or spoiler surface activated, the laws are reconfigured to keep the load alleviation capability.
C. If an aileron or spoiler surface replaced, the laws are reconfigured to keep the load alleviation capability.
A. 长的
B. 小的
C. 短的
A. As you do the valve test, make sure that there is no leakage. Assess the quantity of fuel needed.
B. While you do each step of the valve test, make sure that there is no leakage. Concern the quantity of fuel necessary.
C. As you do the valve test, make sure that there is no leakage. Release the quantity of fuel needed.
A. The rudder is used for yaw control
B. The elevator is used for yaw control
C. The rudder is used for pitch control
A. Transport the part to the overhaul shop.
B. Transport the part to the maintenance shop.
C. Remove the part to the overhaul shop.
A. 转动凸轮以松开管路
B. 转动卡以使管路自由移动
C. 转动卡箍以松开管路
A. 拧紧螺栓时使用不同的措辞。
B. 使用不同的扳手拧紧螺栓。
C. 拧螺栓时使用不同的扭矩。