A、 此安装程序是此类松紧装置类型的安装程序。
B、 此安装程序是此类紧固件的典型安装程序。
C、 此安装过程是此类紧固件的安装类型。
答案:B
A、 此安装程序是此类松紧装置类型的安装程序。
B、 此安装程序是此类紧固件的典型安装程序。
C、 此安装过程是此类紧固件的安装类型。
答案:B
A. 距离皮托管中心线半径3英寸的修复表面轮廓外形,误差不应大于0.007英寸。
B. 距离静压盘中心线3英寸半径上的修复表面等高线,误差不应大于0.007英寸。
C. 静压孔中心线3英寸半径内的修复表面轮廓,误差不应大于0.007英寸。
A. Put sealant around each screw hole.
B. Seal each screw hole.
C. Put each screw hole into sealant.
A. TWINKLE
B. FLASH
C. SPARKLE
A. If you bend this part too far, it will break.
B. The part will bend if you break it too much.
C. If you bend the part too much, it will separate.
A. 那些组件和部件存储、调节并向旅客和机组输送氧气,包括气瓶、释压活门、关断活门、出口、调节器、面罩等。
B. 气瓶、释压活门、关断活门、出口、调节器、面罩等组件和部件储存氧气,并将调节后的氧气提供给乘客和机组。
C. 那些旅客和机组氧气系统的相关组件和部件存储、调节、输送氧气,包括气瓶、释压活门、关断活门、出口、调节器、面罩等。
A. 表1是定义了襟翼角。
B. 表1是襟翼位置的专项说明。
C. 表1是襟翼角度的详细说明。
A. The nose of the aircraft is into the wind.
B. The bottom of the aircraft is into the wind.
C. The top of the aircraft is into the wind.
A. Be careful when you move jet pipes or exhaust cones having insulating blankets.
B. Be careful when you move jet pipes or exhaust cones have insulating blankets.
C. Jet pipes have insulating blankets. Be careful when you move exhaust cones.
A. The wheel chocks must be put forward of the wheels while the aircraft is on the ramp.
B. If the aircraft must be parked on the apron, put the wooden blocks in front of the wheels.
C. If you must park the aircraft on a slope, make sure that wheel chocks are in front of the wheels.
A. 组织维修的维修记录应当根据如下规定:维修工作应当保证记录一致。
B. 维修单位的维修记录应当跟随下列规定:完整的维护工作应当保证记录。
C. 维修单位的维修记录应当符合下列规定:维修工作应当保证记录完整。