A、 警告、注意事项和说明用在重要的部分
B、 重要的部分必须通过警告、注意事项和说明来突出强调
C、 重要的部分可以通过警告、注意事项和说明来突出强调
答案:B
A、 警告、注意事项和说明用在重要的部分
B、 重要的部分必须通过警告、注意事项和说明来突出强调
C、 重要的部分可以通过警告、注意事项和说明来突出强调
答案:B
A. Find appropriate torque values in the table above.
B. Refer to the table that follows for the applicable torque values
C. Proper torque values can be found in the booklet attached.
A. Put down a face mask and protective clothing.
B. Put on a face goggle and protective clothing.
C. Put on a face mask and protective clothing.
A. 让飞机载荷平衡是飞机所有者和机长的责任
B. 飞机被正确地系留是飞机维护者和飞行员的责任。
C. 飞机所有者和飞行员有责任确保飞机装载正常
A. 左1号登机门1号地板右前边缘有一条1英寸深6英寸长的凹陷。
B. 左1号登机门1号地板离右前边缘6英寸处有一条1英寸深的凹槽。
C. 左1号登机门有一块地板到右前边缘6英寸处有一条1英寸深的凹坑。
A. 方向舵用于偏航控制,就是控制飞机绕横轴的运动
B. 方向舵用于偏航控制,就是控制飞机绕立轴的运动
C. 方向舵用于俯仰控制,就是控制飞机绕立轴的运动
A. If liquid spills in the kitchen, all traces of the liquid must be cleaned promptly, and the concerned area must be completely dry.
B. If liquids are spilled inside the galley, you must remove all signs of liquid and fully dry the areas of contamination immediately.
C. If liquid spills in the galley, all marks of the liquid must be removed at once and the polluted area must be completely dried.
A. That portion of the system that automatically controls the position of the lever to properly blend power plant with slat position and aircraft pitch attitude during landing/approach and go around procedures. This includes engaging, sensing, computing, amplifying, controlling, actuating and warning devices such as amplifiers, computers, servos, limit switches, clutches, gear boxes, warning lights, etc.
B. That portion of the system that automatically controls the position of the throttles to properly mix engine power with flap position and aircraft pitch altitude during landing/approach and takeoff procedures. This includes engaging, sensing, computing, amplifying, controlling, actuating and warning devices such as amplifiers, computers, servos, limit switches, clutches, gear boxes, warning lights, etc.
C. That portion of the system that automatically controls the position of the throttles to properly blend engine power with flap position and aircraft pitch attitude during landing/approach and go around procedures. This includes engaging, sensing, computing, amplifying, controlling, actuating and warning devices such as amplifiers, computers, servos, limit switches, clutches, gear boxes, warning lights, etc.
A. Keep the length of the drill bit at 45 mm maximum.
B. Use a drill bit so that its length does not become longer than 45 mm.
C. A drill bit can only be used if its length does not exceed 45 mm.
A. Never exceed speed or Mach number is the speed limit that can never be exceeded at any time.
B. Never exceed speed or Mach number is the speed limitation that will be excessively at any time.
C. Never exceed speed or Mach number is the speed limit that may be surpassed at any time.
A. 设备清单上的项目可以按项目编号进行识别并按逻辑分组,使用诸如“螺旋桨和螺旋桨附件”,“发动机和发动机附件”,“起落架”,“电气设备”,“内部设备”,“自动驾驶”等标题。
B. 设备清单上的项目可以通过序列号表示,并进行逻辑排列使用的标题可以是“螺旋桨和螺旋桨附件”,“发动机和发动机附件”,“起落架”,“电气设备”,“外部设备”,“自动驾驶”等
C. 设备清单上的项目可以通过使用诸如“螺旋桨和螺旋桨附件”,“发动机和发动机附件”,“起落架”,“电气设备”,“外部设备”,“自动驾驶”等标题来进行序列编号标识以及逻辑分组。