A、 Refer to FIG.401 for the distance between rivets.
B、 If you want to know the distance between bolts, refer to FIG.401.
C、 Look at FIG.401 for the dimension between bolts.
答案：A
A、 Refer to FIG.401 for the distance between rivets.
B、 If you want to know the distance between bolts, refer to FIG.401.
C、 Look at FIG.401 for the dimension between bolts.
答案：A
A. Compare the width on the flange between points A and B.
B. Measure the distance on the flange at points A and B.
C. Test the length of points A and B on the flange.
A. Inspect and modify the unit can possible cause the replacement of the units required from this SB
B. After inspection and modification required from this SB, replacement of the unit may be not need because of decreasing possibility of cracks
C. After inspection and modification, Replace the unit because of possible cracks by the require of this SB
A. 警告注意和解释可用于高亮和强调重点事项
B. 可以通过警告,注意和记录的方式强调重要内容
C. 警告注意事项和注释可用于突出或强调重点
A. lowest
B. lower
C. low
A. The pump is installed on the direction opposite to valve flow
B. The pump is installed on the direction identifie to valve flow
C. The pump is installed on the direction identifie to valve
A. Mechanical devices that drive the engine at a desired RPM.
B. Mechanical devices that drive the generators at a desired RPM.
C. Electromechanical devices that drive the generators at a desired RPM.
A. That portion of the system is used to eliminate or prevent the formation of ice on propellers.
B. The function of that part of the system is to decelerate or prevent the deformation of ice on propellers.
C. The usage of the system portion is to accelerate or facilitate the formation of ice on propellers.
A. The failure of the valve causes the contamination of the hydraulic fluid.
B. The failure of the valve is unrelated to the contamination of the hydraulic fluid.
C. Hydraulic fluid contamination is the major contributor for the valve failure.
A. Components and components (ducts and valves) that transport high pressure air from the air source to other systems, such as environmental control, deicing, etc.
B. Those units and components (ducts and valves) which deliver large volumes of compressed air from a power source to connecting points for such other systems as environmental controls, deicing, etc.
C. Conveying large quantities of compressed air from the intake line to other systems, such as environmental control, deicing, etc. Components and components (ducts and valves) at connection points.
A. 主题标题应与本规范中使用的示例相同,或实质上等同于本规范中使用的示例,除非因飞机型号的设计或运行特点而不适用。
B. 除了因飞机种类的设计或操作方式不适用的情况,主题标题应与本规范中使用的示例一致或本质相似。
C. 除了因飞机类型的设计或运行方式不适用的情况,主题标题应与本规范中使用的示例一致或近似。
