A、 STE规范表达内容的方式,但不规范格式(例如字体、编号等)。
B、 STE管理规范的内容而不是格式(例如字号,编码等)。
C、 STE被用于规范内容的形式而不是版式(例如字号,数字等)。
答案：A
A、 STE规范表达内容的方式,但不规范格式(例如字体、编号等)。
B、 STE管理规范的内容而不是格式(例如字号,编码等)。
C、 STE被用于规范内容的形式而不是版式(例如字号,数字等)。
答案：A
A. After 10-flight cycles or 25 flight hours, which comes first the rod end bearing shall be discarded if its wear is greater than 0.010 inch of diameter.
B. If the rod end bearing wear is greater than 0.010 inch in radial play, reject it within newt 10 flight cycles or 25 flight hours whichever comes first.
C. Destroy the rod end bearing during 10 flight cycles or 2 flight hours when its wear is more than 0.010 inch of its radius, whichever comes first.
A. Before you can apply it, you must make a paste. To do this, mix the powder with pure water or spirit.
B. Before you can apply it, you must make a paste. To do this, mix the powder with pure water or white spirit.
C. Before you can apply it, you must make a paste. To do this, mix the powder with pure water or ethyl alcohol.
A. Artificial feel used in flight control system, its direction is opposition to pilot’s movement.
B. Artificial feel force is inversely proportional to the aerodynamic loads acting on the control surfaces.
C. Artificial feel in aircraft flight control system is used in manual flight control of the aircraft.
A. If the manual is loose-leaf, each page should contain the date and effective revision date when revised, or otherwise be identified as to revision status.
B. If the manual is loose-leaf, each page should contain the date and effective revision reason when revised, or otherwise be identified as to revision status.
C. If the manual is loose-leaf, each page should contain the reason and effective revision date when revised, or otherwise be identified as to revision status.
A. 勤务工作需要飞机的信息,以使提供适当的燃油和滑油
B. 勤务需要相应的信息才可以给飞机提供足量的燃油和滑油
C. 勤务包括为飞机提供适当的燃油和滑油的信息
A. Surface layer free from contaminate.
B. Surface layer free from uncontaminate.
C. Surface lamination free from contaminate.
A. Use a filter to remove unwanted material from the oil.
B. Use a valve to remove unwanted material from the gas.
C. Use a filter to remove unwanted material from the fluid.
A. Three computers collect data and parameters from the systems and put them together on the data link to the display unit;
B. Three computers gather data and parameters from the systems and put them together on the data link to the display unit;
C. Three Components collect data and parameters from the systems and put them together on the data link to the display unit;
A. Place mode select switch in REFUEL position.
B. Push mode switch in ON position.
C. Place joggle switch to REFUEL on position.
A. The engines can also use suction feed from a main tank.
B. The engines can also use suction feed from the center tank.
C. The engines can also use suction feed from the trim tank.
