A、 All range distances shall be expressed in nautical miles.
B、 All range dimensions shall be defined in kilometers.
C、 Nautical miles should not express all range distances.
答案：A
A、 All range distances shall be expressed in nautical miles.
B、 All range dimensions shall be defined in kilometers.
C、 Nautical miles should not express all range distances.
答案：A
A. 更换有摩擦的导热垫。
B. 更换有磨损的隔热毯。
C. 更换有晃动的绝缘板。
A. 完成步骤1到4,以确保没有轴向负荷施加在杆上。
B. 完成步骤1到4,以确保没有径向负荷施加在杆上。
C. 完成步骤1到4,以确保在杆上没有轮轴方向上的负载。
A. 依次执行以下工作以安全打开相应发动机上的左右侧反推
B. 安全打开相应发动机上的左右侧反推来依次执行以下工作
C. 依次执行以下工作以安全打开相应发动机上的左右侧推力杆
A. 维护安全组件
B. 安装安全装置
C. 拆卸安全部件
A. That portion of the system which presents information derived from pulse-coded transmissions. Includes telephone exchange, SELCAL, CALSEL, etc.
B. That portion of the system which presents information derived from sine wave-coded transmissions. Includes Teleprinter, SELCAL, CALSEL, etc.
C. That portion of the system which presents information derived from pulse-coded transmissions. Includes Teleprinter, SELCAL, CALSEL, etc.
A. This CAP has been developed according to FAA AC 91-56 guidelines.
B. FAA AC 91-56 guideline developed the CAP accordingly.
C. This CAP has been developed as a reference of FAA AC 91-56.
A. This method will help you during the subsequent assembly procedures;
B. This method will help you after the subsequent assembly procedures;
C. This method will help you with the subsequent assembly procedures;
A. This program describes how to identify an immediate failure and how to handle a malfunction occurred.
B. This procedure explains how to recognize impending problems and what to do if malfunctions occur.
C. How to confirm the current problems and what should you do when malfunctions occur are described in this procedure.
A. All major repairs of the components in this chapter must be done in a qualified workshop according to data provided by the component manufacturer
B. All repairs of the parts in this chapter must be done in the designated workshop according to the parameter s provided by the component manufacturer.
C. Overhaul of any or all components in this chapter must be accomplished in a qualified shop in accordance with data supplied by the component manufacturer.
A. 必须要注意不要损坏防火墙罩。
B. 小心损坏火墙盖子
C. 核心必须要带走以不损坏防火墙罩。
