1246. If a manufacturer elects to provide comprehensive inspection information to supplement the basic airplane maintenance manual ,this Specification is an example of , and extablishes a standard for ,a Continuing Airworthiness Program inspection Document

A. 使用特定的滑油,添加到滑油箱

B. 使用规定的滑油,补充滑油箱

C. 使用预订的滑油,冲洗滑油箱

A. Definitions in this manual shall be conformed with those in the Federal Aviation Legislations.

B. Definitions in the handbook shall be consistent with definitions contained in the Federal Aviation Regulations.

C. Definitions in the Federal Aviation Regulations shall be consistent with definitions contained in the handbook.

A. Before you operate the pump again, let the reservoir temperature decrease to ambient temperature or below the temperature at which the equipment damage occur.

B. Before you operate the pump again, decrease the reservoir temperature to outside temperature to aggravate the damage to equipment.

C. Before you operate the pump again, decrease the reservoir temperature to the environment temperature around to prevent the equipment from being damaged.

A. 在起飞和飞行期间,在发动机故障的情况下应对飞机采取相应措施。

B. 对于所有飞机在起飞和飞行过程中发生的所有发动机故障,应提供相应的程序。

C. 在起飞和飞行期间,对于飞机的各种发动机故障,应执行相应程序。

A. The procedures should give the address of the facility and time the program will be rechecked to find out if it is coherent enough for the type of maintenance being performed at the facility.

B. The program shall be checked to decide if it is updated and sufficient for the type of maintenance being performed at the facility. The interval of the checks shall be stated in this procedure.

C. The program will not be performed at the facility if this procedure shows outdated and inadequacy information for the type of maintenance.

A. This organization was asked to look into the readability of maintenance documentation in the civil aviation industry and find a resolution to simplify the language used to write such documentation.

B. This organizations was as ked to research the legibility of maintenance documentation in the civil aviation industry and get a way to simplify the language used to write such documentation.

C. This organization was as ked to study the readability of maintenance documentation in the civil aviation industry and find a met hod to single out the language used to write such documentation.

A. The manufacturer shall include a description of the type service information issued by the manufacturer and the office or department to contact to get such information that the aircraft may be maintained in accordance with the latest information.

B. The manufacturer shall include a description of the type service information issued by the manufacturer and the office or department to contact to obtain such information sol that the aircraft may be maintained in accordance with the latest information.

C. The factory shall include a description of the type service information issued by the manufacturer and the office or department to contact to obtain such information so that the aircraft may be maintained related to the latest information.

A. That portion of the system is used to eliminate or prevent the formation of ice on propellers.

B. The function of that part of the system is to decelerate or prevent the deformation of ice on propellers.

C. The usage of the system portion is to accelerate or facilitate the formation of ice on propellers.

A. 确保钢索张力正常。

B. 确保锁定线束绷紧。

C. 确保保险丝有张力。

A. 两个关断螺栓是可调节的。

B. 两个止动螺栓是可校准的。

C. 两个止动螺栓是可调节的。