A、 Operate and check the pre-charge pressure of the hydraulic brake supercharger
B、 Operationally check the hydraulic brake accumulator pre-charge pressure.
C、 Operate and examine the pre-charge pressure of the hydraulic brake pressurizer.
答案:B
A、 Operate and check the pre-charge pressure of the hydraulic brake supercharger
B、 Operationally check the hydraulic brake accumulator pre-charge pressure.
C、 Operate and examine the pre-charge pressure of the hydraulic brake pressurizer.
答案:B
A. Make certain that the oil level is audible through the sight gauge;
B. Make certain that the oil level is visible through the sight gauge;
C. Make certain that the oil level is touchable through the sight gauge;
A. The tune time for a frequency not in memory is 2 to 4 seconds typical, 7 seconds maximum.
B. The adjust time for a frequency not in memory is 2 to 4 seconds typical, 7 seconds maximum.
C. The tune time for a frequency not in memory is 2 to 4 seconds common, 7 seconds maximum.
A. The rudder is used for yaw control
B. The elevator is used for yaw control
C. The rudder is used for pitch control
A. This chapter introduces components which record, store, or calculate data from related systems.
B. This chapter introduces units which keep, store or compute information from unrelated systems.
C. This chapter introduces units which record, store, or compute data from unrelated systems.
A. 两个人必须要完成这个程序。
B. 此过程最多需要两个人
C. 执行这个程序需要两个人。
A. The laptop has these main parts
B. The laptop has these primary parts
C. The laptop has these important parts
A. Turn the repair patch align the surface structure and mark the cut out.
B. Rotate the repair patch to mark the incision for repair.
C. Open the repair picture to align the structural surface and mark the cut out.
A. Manufacturers may delete systems not applicable to their product.
B. Manufacturers may omit systems not applicable to their product.
C. Manufacturers may submit systems not applicable to their product.
A. The APU is designed to generate and supply one or some of the following power: auxiliary electric, hydraulic, pneumatic or other power.
B. The purpose of the APU is to produce and distribute one or more auxiliary electric, hydraulic, pneumatic or other power.
C. Auxiliary electric, hydraulic, pneumatic or other power can be generated and supplied by one or several APUs.
A. GO INTO
B. SPILLS
C. FLOW