A、 defects
B、 Leakage
C、 abrasive
答案:A
A、 defects
B、 Leakage
C、 abrasive
答案:A
A. Do not give vague, general information.
B. Do not provide clear, general information.
C. Do not list complex, valid information.
A. The maximum distance between the plate edge and the frame is inferior to 0.05mm.
B. The clearance between the boundary of the panel and the bay can not exceed 0.05mm.
C. The distance between the edge of the panel and the partition must not be more than 0.05mm.
A. The revision dates need to be displayed at each revision location
B. The revision date needs to be displayed in an obvious place.
C. The revision date should be displayed on every revision page
A. 记录对蒙皮表面进行的所有修理
B. 记录对蒙皮封严进行的所有修理。
C. 记录对蒙皮损伤进行的所有处理。
A. 那些说明可以作为定期维修所必须的参考
B. 那些指令是执行定期维修所必须的
C. 那些指示必须进行有计划维修
A. 消耗燃油包括用于发动机启动、拖动、起飞、正常爬升、下降和45分钟备用的燃油。
B. 用于发动机启动、拖动、起飞、慢速爬升、下降和45分钟使用的燃油,即为消耗燃油。
C. 所需燃油包括用于发动机启动、滑行、起飞、正常爬升、下降和45分钟备用的燃油。
A. Time the pressure decay.
B. Count the time necessary for the pressure to decrease.
C. Record the time for the pressure to go upwards.
A. If the cable twists, disconnect the two connectors.
B. If the wire bents, break the two connectors.
C. If the cable wire breaks, disconnect both ends of the connectors.
A. If the depth of a crack is 0.2 mm or less, reject the part.
B. If the width of a crack is more than 0.2 mm, reject the part.
C. If the depth of a crack is more than 0.2 mm, reject the part.
A. 飞机交付时需推荐检查程序,以保持其适航性
B. 飞机交付时,随带的检查程序是为了保持其适航性
C. 飞机交付时附有推荐的检查程序,以保持其适航性