1355. This Section of the Pilot＇s Operating Handbook shall contain only those limitations required by regulation or necessary for safe operation of the airplane and approved by the regulatory authority

A. 该限制应在飞机处于起落架上或提升装置上时使用。

B. 如果飞机在起落架上或被顶起,请查阅此文件。

C. 该限制适用于飞机在起落架上或千斤顶上。

A. The first step in listing possible causes of each trouble is to show what sections of the system may be at fault.

B. Listing possible causes of each trouble is the first step to show what sections of the system may be failure.

C. The first step in listing which parts of the system are likely to fail is to show the possible causes of each failure

A. Describe how to operate the safety belt and wire harnesses.

B. Tell the way to use the seat and shoulder belts.

C. The seat and shoulder harness should be used by the pilot.

A. If problems are found, refer to maintenance manual.

B. If you find a problem, refer to the troubleshooting manual.

C. If you find a problem, troubleshoot the manual as reference.

A. This procedure gives you the disassembly process.

B. You can find the procedures for disassembling in this section.

C. The assembly process can be found in this section.

A. If the filters become clogged, send them to the laboratory for analysis of the contamination.

B. If the filters are surged, send them to laboratory for contamination analysis

C. If the contaminant is blocking the filter the material should be sent to the laboratory for analysis

A. 确保皮托管温度增加至500摄氏度以上。

B. 确保机外环境温度增加500摄氏度。

C. 确保探头温度增加至500摄氏度以上。

A. wash system

B. water system

C. cleaning system

A. Set the switch to on.

B. Move the switch to on.

C. Put the switch to on.

A. 只要可行,每个符号在物理上都应类似于示意图中描述的实际系统组件。

B. 无论是否可行,每个标志在理论上都应与示意图中描述的实际系统组件一致。

C. 只要实际可以使用,每个标记在物理上都应完全和示意图中描述的实际系统组件相同。