A、 The thickness of the second coating layer must be 0.5mm and 0.6mm.
B、 The coating thickness must be more than 0.5mm and less than 0.6mm.
C、 The thickness of primer layer must be between 0.5 mm and 0.6 mm.
答案：C
A、 The thickness of the second coating layer must be 0.5mm and 0.6mm.
B、 The coating thickness must be more than 0.5mm and less than 0.6mm.
C、 The thickness of primer layer must be between 0.5 mm and 0.6 mm.
答案：C
A. This configuration has three rest data for all the interface and air data functions.
B. This configuration has triple redundant data for all the inertial and air data functions.
C. This configuration has three rest data for all the inertial and air data functions.
A. 显示器顶部和左侧角落的数字指向相关页面。
B. 显示器左上角的数字代表手册对应页码。
C. 显示器左上角的数字代表相关页面。
A. Accessory Compartments are those compartments used for the housing of various components or accessories;
B. Cargo Compartment is used to store various components and cargo;
C. Component Compartment is used to house various components and equipments;
A. The Manufacture recommends that Buyer＇s qualified technicians inspect, troubleshoot test and repair or replace systems and components recommended by the Manufacturer that may be repairable o replaceable during normal maintenance procedures. The Manufacturer shall provide sufficient information in the Maintenance Manual and/or Maintenance data.
B. The Maintenance Manual and/or Maintenance Data provided by the manufacturer to the Purchaser shall contain enough information to enable qualified mechanics to inspect, troubleshoot test and repair or replace all systems and units that the Manufacturer regarded to be repairable or replaceable during normal maintenance procedures.
C. The Manufacturer shall provide the Purchaser with adequate information to enable the mechanics to do qualified work, such s to inspect troubleshoot test and repair or replace all systems and components that repairable or replaceable with reference to the Maintenance Manual and/or Maintenance Data ad required.
A. Handbooks shall be ready to revise in accordance with the specification.
B. In accordance with the specification, manuals should be easy to revise.
C. Handbooks have been already revised, according to the specification.
A. Examine the area that is around the drain holes for signs of corrosion.
B. Check the scavenge hole and areas around it for corrosion
C. Make sure that there＇s no corrosion around the drain hole
A. The rules containing in this specification shall provide a guide to the formatting, type and method of all present documents in the manufacturer＇s maintenance manual.
B. The rules in this specification are served as a guide for the format style and way of representation for all materials contained in manufacturer＇s maintenance manual.
C. The rules contained in this specification shall serve as guides for format, style and method of presentation for all material included in maintenance manuals prepared by manufacturers.
A. If the electrolyte leaks, remove it immediately.
B. If the electrolyte spills, remove it immediately.
C. If the material of battery spills, remove it immediately.
A. the speed of the output shaft of the CSD is constant no matter if the speed of its input changes.
B. the speed of the output shaft of the CSD varies no matter if the speed of its input keeps constant.
C. the speed of the output shaft of the CSD is constant only if the speed of its input remains the same.
A. 确保指示灯点亮后叶片展开。
B. 确保叶片打开时指示灯点亮。
C. 确保叶片展开的过程中指示灯点亮。
