B. If you fail to operate the system control properly or the equipment is damaged, the hydraulic fluid will be transferred between hydraulic system A and B.

C. Flow of hydraulic fluid between hydraulic system A and B result in accidental operation of system controls or damaged equipment.

点击查看答案

1689. Remove burrs with rotary file in accordance with standard practices and SRM

A. 根据标准施工手册及结构修理手册里文件的要求除去划痕。

B. 根据标准施工手册及结构修理手册的要求用轮挫磨去毛刺。

C. 根据标准施工手册及结构修理手册的程序除去杂质。

点击查看答案

463. Motor the engine without ignition

A. 发动机的驱动马达没有点火

B. 启动发动机但不点火

C. 带转发动机但不点火

点击查看答案

2462. Find the cause of the incorrect indication

A. 找出正确显示的来源

B. 找出错误显示的原因

C. 找出错误显示的位置

点击查看答案

983. 确保液压油箱内的液压油高于最低液面。

A. Make sure that the oil in the hydraulic tank is above the minimum lever.

B. Make sure that the fluid in the hydraulic reservoir is above the minimum level.

C. Make sure that the fluid in the fuel reservoir is below the maximum level.

点击查看答案

2148. Use a 12-inch wrench handle during this procedure

A. 在执行此程序过程中请使用12英寸的套筒扳手。

B. 在此过程中使用12英尺套筒手柄。

C. 在此过程中使用12号扳手手柄。

点击查看答案

1761. To prevent overheat damage to the wing leading edge, the engine bleed air is given maximum cooling during ground operations

A. Prior to ground operations, maximum cooling of the engine bleed air is provided to avoid the overheat damage to the wing leading edge.

B. To keep the wing leading edge from overheat damage, the engine bleed air has a maximum cooling effect during ground operations.

C. While the aircraft is operating on the ground, the engine bleed air provides a best cooling to the wing leading edge to renovate the damage due to overheat.

点击查看答案

302. Make sure that the two spigots at the bottom of the unit engage

A. 确保装置底部两个接线板粘合

B. 确保装置底部两个接口结合

C. 确保装置顶部两个接线板粘合

点击查看答案

1565. That portion of the system common to more than one subsystem which is used for pressurizing supply tanks to insure fluid flow

A. 多个子系统共有的系统部分,用于对水箱加压以确保水流动。

B. 多个子系统组成一个系统,用于对水箱加压以确保水流动。

C. 一个系统由多个子系统组成,用于对水箱加压以保证水增压。

点击查看答案