1524. lf the damage is only to the middle treads, the tire is serviceable

A. Make sure there is no leakage of hydraulic fluid at the router.

B. Make sure there is no leakage of hydraulic fluid at the transducer.

C. Make sure there is no leakage of hydraulic fluid at the transponder.

A. It is necessary to define symbols, symbols, abbreviations and terminology for the dear understanding of the information presented in various sections of the Handbook.

B. Define signatures, short words and jargon necessary for understanding clearly of the information contained in every section of the Handbook.

C. It is important to define signs, acronyms and nomenclature for the understanding of the information provided in this section of the Handbook.

A. 表1是定义了襟翼角。

B. 表1是襟翼位置的专项说明。

C. 表1是襟翼角度的详细说明。

A. The manufacturer may establish procedures to provide drawback on unairworthy conditions

B. The manufacturer may establish procedures to provide response on unairworthy conditions

C. The manufacturer may establish procedures to provide recall on unairworthy conditions.

A. 优先计算机借助于应用逻辑,将来自部件的输出参数与部件自身的可用数据进行比较。

B. 优先计算机借助于关联逻辑,将来自部件的瑜出参数与优先计算机自身的可用数据进行比较。

C. 优先计算机比较以下内容:来自部件的输出参数与优先计算机自身的可用数据,这个数据是借助于关联逻辑产生的。

A. 做好排查工作,找到腐蚀原因。

B. 采用这种检修方法可以发现变形的原因。

C. 执行排故程序,以找出故障原因。

A. You had better not to weld engine components when the engine is installed on the airframe.

B. You＇re not allowed to operate engine components when the engine is installed on the airframe.

C. You had-better not to weld engine components when the engine is running.

A. The work must be completed according to the boss instructions.

B. The work must be done in compliance with the instructions in the Maintenance Manual.

C. The work must be done according to the Maintenance Manual ahead of time.

A. Make sure you flush all the surface to remove all the cleaning solution.

B. Make sure the surface is completely flat for cleaning with solution.

C. Make sure you flush the surface sufficiently to remove all the cleaning solution.

A. 如果调节止动不正确,测试结果将不准确。

B. 如果调节止动未修正,测试结果将不准确。

C. 如果止动点的调整不正确,测试结果将不准确。