A、 发行人栏目,出版物名称,飞机型号和发行或修订日期都应该出现在活页文件页面中。
B、 制造商的刊头,出版物标,飞机型号和发行或修订日期必须出现在活页文件的所有页面。
C、 生产商发行人栏目,出版物名称,飞机类型和发布或修订日期都应该出现在活页文件所有页面中。
答案:B
A、 发行人栏目,出版物名称,飞机型号和发行或修订日期都应该出现在活页文件页面中。
B、 制造商的刊头,出版物标,飞机型号和发行或修订日期必须出现在活页文件的所有页面。
C、 生产商发行人栏目,出版物名称,飞机类型和发布或修订日期都应该出现在活页文件所有页面中。
答案:B
A. In procedural sentences, you can use a maximum of 20 words before the comma.
B. In procedural sentences, you can use a maximum of 20 words before the colon.
C. In procedural sentences, you can use at least 20 words before the full stop.
A. 在活塞发动机驱动的飞机上,排气温度指示器用于识别各种功率设置下的油气比。
B. 在活塞发动机驱动的飞机上,排气温度指示器用于设置各种功率设置下的油和空气的混合比。
C. 在动力活塞驱动的飞机发动机上,排气温度指针用于识别最大功率设置下的油气比。
A. Examine the area that is around the drain holes for signs of corrosion.
B. Check the scavenge hole and areas around it for corrosion
C. Make sure that there's no corrosion around the drain hole
A. 把O形封圈浸泡在液压油里面。
B. 防止液压油腐蚀O形封圈。
C. 用液压油润滑O形封圈。
A. 以30度的幅度顺时针旋转调节器。
B. 以每次30度的增量,逆时针旋转调节器。
C. 逆时针旋转调节器,每次递减30度。
A. Check whether the linkage moves slightly or not.
B. Examine the linkage for smooth movement.
C. Inspect the status of the linkage movement.
A. The test will stop when the pressure is larger than 7000 kpA.
B. Stop the test if the pressure reaches 7000 pA.
C. Stop the test when the pressure is more than 7000 kpA.
A. 来自压气机的空气与来自燃油喷嘴的燃油在燃烧室混合。
B. 从压气机出来的空气和燃油在燃烧室混合。
C. 从压气机出来的空气和从燃油喷嘴出来的燃油在燃烧室燃烧。
A. AD describes corrective action, e g inspection, repair or maintenance, which may be listed by AD or included in another document, E,G manufacturer's Service Bulletin that acts as reference in the AD.
B. The corrective action prescribed by the AD, such as an inspection, repair, or modification, may be detailed in the AD itself or may be contained in another document, such as manufacturer's Service Bulletin, which is referenced in the AD.
C. AD details the requirements for inspection, repair or modification described in corrective action, or it may be contained in another document, such as Service Bulletin referenced in AD.
A. 如果包含所有技术数据,则标题应为飞机维修手册
B. 标题应为飞机维修手册,则所有数据包含在其中。
C. 飞机维修手册的标题应该包含所有技术数据。