A、 Replace the unit at the next check.
B、 Repeat the unit at the next check.
C、 Perform the unit at the next check.
答案:A
A、 Replace the unit at the next check.
B、 Repeat the unit at the next check.
C、 Perform the unit at the next check.
答案:A
A. Other information like GAMA membership identification, copyright notice, etc., may be added. CAP producer shall determine the format and layout, and they shall resemble the producer's existing documents.
B. Additional information, such as GAMA membership identification, copyright notice, etc., may be included. Format and layout is to be decided by the CAP producer, recognizing the it is desirable that they should be familiar to the producer's existing documents.
C. Cap producer may include other information like GAMA membership identification, copyright notice, etc., and determine the format and layout which should be distinct from the producer's existing documents.
A. It is necessary to add fluid to the hydraulic reservoir
B. Drain fluid to the hydraulic reservoir as necessary.
C. Add fluid to the hydraulic reservoir as necessary
A. When someone is working in a fuel tank you must stay next to the tank at all times.
B. When you do work in a fuel tank you must stay close to the tank at all times.
C. When one person does work in a fuel tank another person must be outside the tank at all times.
A. Make sure that the mark on the bolt is aligned with the mark on the handle.
B. Make sure that the mark on the bolt is level with the mark on the handle.
C. Make sure that the mark on the bolt is parallel to the mark on the handle.
A. It is the responsibility of the operator to ensure that alternative tools or equipment can work well and are dangerous to the parts and personnel as the ones specified in the procedure if you use them.
B. If alternative tools or equipment are used, the operator must ensure that they can play the same role and are as safe as the tools or equipment specified in the procedure to the parts and personnel.
C. If the manufacturer car make sure that alternative tools or equipment can meet the requirement and are as safe to the parts and equipment as the ones specified in the procedure, you can use them.
A. Different meanings occur when words are combined in different ways.
B. When words can link up in different ways, ambiguity occurs.
C. Misunderstanding happens when words are contained in different modes.
A. This document shall clearly states the minimum size crack you may discover in a crack inspection. If no minimum is defined, it shall have a statement that has the same effect.
B. This document shall specify the minimum allowed crack size expected to be discovered for a crack inspection or, if no minimum is defined, an equally valid standard.
C. The minimum crack size you are going to discover during a crack inspection shall be included in this document. However, if you could not set forth a standard, a statement shall take place.
A. 为了重复步骤, 耦合器问收发机要另一个调谐电源的简短降级。
B. 耦合器问收发机要另一个调谐电源的简短降级目的是步骤简化。
C. 对于校准步骤,耦合器向收发机要求另一个调谐电源的短暂降级。
A. This limiting rate-of-climb value shall be distinguished clearly along the chart together with the power and configuration conditions.
B. This limiting rate-of-climb value and the power and configuration conditions shall be identified clearly on the chart.
C. The chart shall clearly show the identity of this limiting rate-of-climb value as well as the power and configuration conditions.
A. Verify that the bleed air of the ground car can not lead to a wrong information.
B. Make sure that the exhaust from the ground cart does not cause an incorrect indication.
C. Make sure that the wrong indication is caused by the exhaust from the ground cart.