A、 Operational test is more complex and specific than the functional test.
B、 Functional tests require supplement equipment to be done.
C、 Functional test is used to ensure a unit is functioning in all aspects in according to maximum acceptable design specifications.
答案:B
A、 Operational test is more complex and specific than the functional test.
B、 Functional tests require supplement equipment to be done.
C、 Functional test is used to ensure a unit is functioning in all aspects in according to maximum acceptable design specifications.
答案:B
A. 用于指示低压的压力计使用更灵活的管子,更容易展开和卷绕
B. 用于指示较低压力的仪表使用更易弯曲的管子,线圈更易散开和缠绕。
C. 用于指示较低压力的压力表使用的软管更加柔软,可以随时解开和盘绕。
A. According to the authority given to persons specified below, the unit recognized in item 3 was inspected in the manner stipulated by authority and is approved.
B. Based on the authority given to the following stated persons, the unit described in item 3 was inspected in the authority defined manner and gets approved.
C. Thanks to the authority given to persons as below, the unit found in item 3 was inspected in the manner stipulated by authority which is approved.
A. 飞机的总布置图应以比例线图表示,该图由后视图,侧视图和正视图组成,并以垂直顺序显示在一页纸上。
B. 飞机的总布置图应以比例线图表示,该图由平面图,侧视图和正视图组成,并以垂直顺序显示在一页纸上。
C. 飞机的总布置图应以比例线图表示,该图由平面图,俯视图和正视图组成,并以垂直顺序显示在一页纸上。
A. 如果没有决定是否更换组件,请监控其湿度至少15个循环。
B. 如果决定不更换当前组件,请监控其温度至少15个循环。
C. 如果决定更换当前组件,请监控其温度至多15个循环。
A. 用干净的棉布浸湿水后清除除污剂。
B. 用清水浸湿并清洗带有洗涤剂的干净棉布。
C. 用干净的棉布清除污渍,再用清水洗涤。
A. 只有经过授权的人员方可以留在该区域
B. 只有经过改装的人员方可以留在该区域
C. 只有经过检验的人员方可以留在该区域
A. 当达到预设阈值时,烟雾探测器通过客舱内部通信数据系统触发警告。
B. 当预设的温度达到时,烟雾探测器会发出警告,通过客舱内部通信数据系统。
C. 当预设的数值达到时,客舱内部通信数据系统里的烟雾探测器会发出警告。
A. 主要设备的制造商应按本规范的标准提供维护、故障排除、检查和更换资料。
B. 主要部件的制造商应按本规范的格式提供维护、故障排除、检查和修理资料。
C. 主要部件的制造商应按本文件的格式提供勤务、故障排除、检查和修理资料。
A. Select the hydraulic system which you will apply pressure.
B. Pressurize the selected hydraulic system.
C. Select the hydraulic system which will be depressurized.
A. 在机身排水孔、管道或通道附近或周围涂抹润滑剂时,请勿造成堵塞。排水孔的功能是将冷凝水和流体排出机外。
B. 在机身排水孔、管道或通道附近或周围涂抹密封剂时,请勿造成堵塞。排水孔的功能是将冷凝水和流体排出机外。
C. 在机翼排水孔、管道或通道附近或周围涂抹密封剂时,请勿造成堵塞。排水孔的功能是将冷凝水和流体排出机外。