A、 If the depth of a crack is 0.2 mm or less, reject the part.
B、 If the width of a crack is more than 0.2 mm, reject the part.
C、 If the depth of a crack is more than 0.2 mm, reject the part.
答案：C
A、 If the depth of a crack is 0.2 mm or less, reject the part.
B、 If the width of a crack is more than 0.2 mm, reject the part.
C、 If the depth of a crack is more than 0.2 mm, reject the part.
答案：C
A. Drill the hole until it has a radius of 8.00±0.003 mm.
B. Ream the hole until it has a diameter of 8.00±0.003 mm.
C. Trim the hole until it has a width of 8.00±0.003 mm.
A. Visually check the forward engine mount to the fan frame bolts if they are correctly installed and damaged.
B. Do a visual check of the bolts which attach the forward engine mount to the fan frame for the correct installation and damage.
C. Visually check the correct installation and damage of the forward engine mount to the fan frame bolts.
A. When total revisions including left pages, above 60% of the total pages in the manual, a reassure of the manual should not be prepared.
B. When accumulated revisions including back-up pages, less than 60% of the total pages in the manual, a reissue of the manual should not be prepared.
C. When accumulated revisions including left pages, less than 60% of the total pages in the manual a revise of the manual should not be prepared.
A. Hydraulic fluid, oil and fuel belong to the combustible materials of Class c fire.
B. Paper and wood belong to the combustible materials of Class c fire.
C. Electrical equipment belong to the combustible materials of Class C fire.
A. 组装总管
B. 安装连料
C. 安装总管
A. 通气油箱排放单向活门允许通气油箱内的燃油流到1号或2号主油箱。
B. 通气油箱排放检查活门使通气油箱内的燃油流动于1号和2号油箱之间。
C. 通气油箱排放单向活门使通气油箱内的燃油流入1号及2号主油箱。
A. 来自压气机的空气和来自燃油喷嘴的燃油在燃烧室混合。
B. 来自压气机的空气和来自燃油喷嘴的燃油在燃烧室燃烧。
C. 来自压气机的空气和燃油在燃烧室的喷嘴处混合。
A. Staff must violate this procedure.
B. All persons must follow this procedure.
C. Personnel must deviate from this procedure.
A. This Specification shall be expected to prepare a continuous airworthiness program other than the FAA airworthiness organization.
B. If the continuous airworthiness program is prepared accordingly and to be accepted by other airworthiness agencies but FAA it nay replace the appropriate agency and its regulations.
C. This Specification could be used to prepare a continuous airworthiness program approved by other airworthiness agencies, but it must be approved by FAA airworthiness agencies.
A. FIND
B. TOUCH
C. FEEL
