A、 The fuselage is divided horizontally by the floor, which is built up from beams and panels.
B、 The fuselage is divided vertically by the floor, which is built up from beams and panels.
C、 The fuselage is divided vertically by the floor,that is made from beams and panels.
答案:A
A、 The fuselage is divided horizontally by the floor, which is built up from beams and panels.
B、 The fuselage is divided vertically by the floor, which is built up from beams and panels.
C、 The fuselage is divided vertically by the floor,that is made from beams and panels.
答案:A
A. The Boeing-777 airplanes are different from the previous Boeing series ones mainly in that they are flown by wires.
B. The difference between the Boeing-777airplanes and the subsequent Boeing series is that they are operated by wires.
C. Fly-by-wire is the main difference between Boeing-777 airplanes and the subsequent Boeing series.
A. 一部分飞机,特别是相对简单的飞机,可能不需要CAPs,因为有充足的信息保持飞机在整个使用过程中持续适航,它们的使用寿命包含在飞机维修手册中。
B. 一部分飞机,即一些特别简单的飞机,可能不需要CAPs,因为关于这些飞机的有效信息可以确保飞机在整个使用寿命中持续适航,这些信息包含在飞机维修手册中。
C. 一部分飞机,尤其是相对简单的飞机,可以不需要CAPs,因为飞机维修手册中包含了足够的信息,可以确保飞机在整个使用寿命中保持持续适航。
A. 确保装置运转良好。
B. 确保装置满足要求。
C. 确保组件是令人满意的。
A. The date of the change shall be shown on each printed page.
B. The date of the revision shall be shown on each revised page.
C. The time of the revision shall be shown on each revised page.
A. When fuel or lubricating oil overflows, clean the area at once. There exists a danger due to the wet surface that can cause falling.
B. Clean the area where fuel or lubricating oil are knocked over without delay because the wet surface that may lead to the fall is dangerous.
C. The area contaminated by fuel or lubricating oil shall be cleared up firstly because the dirty surface brings a risk of fall.
A. STE规范表达内容的方式,但不规范格式(例如字体、编号等)。
B. STE管理规范的内容而不是格式(例如字号,编码等)。
C. STE被用于规范内容的形式而不是版式(例如字号,数字等)。
A. Landing gear position will not effect its speed;
B. The stall speed will be effected by landing gear position;
C. The stall speed is not effected by landing gear position;
A. 拆装部件时,不要让零件掉落。如果他们掉落,可能导致永久损伤。
B. 组装部件时,不要让零件掉落。如果他们掉落,可能导致显著的损伤
C. 组装部件时,不要让零件掉落。如果他们掉落,可能导致永久的损伤
A. 通过活门的流体必须是可见的
B. 通过活门的油液必须是透明的
C. 通过活门的流体必须是连续的
A. 如果没有决定是否更换组件,请监控其湿度至少15个循环。
B. 如果决定不更换当前组件,请监控其温度至少15个循环。
C. 如果决定更换当前组件,请监控其温度至多15个循环。