A、 The specification gives the symbols for relays, diodes, and other parts of the system.
B、 The specification gives the requirement for markings on relay, triode and other parts of the system.
C、 The specification excludes symbols for relays, diodes, and other system parts.
答案：A
A、 The specification gives the symbols for relays, diodes, and other parts of the system.
B、 The specification gives the requirement for markings on relay, triode and other parts of the system.
C、 The specification excludes symbols for relays, diodes, and other system parts.
答案：A
A. The inspection/check portion shall provide information and procedures necessary to supply access to system and check of a system, a unit, or an area.
B. The inspection/inspection section shall provide the information and procedures required to access and inspect the system, component or area.
C. The inspection/check portion shall provide information and procedure necessary to gain access to and inspection or check of a system, a unit, or an area.
A. If you want to use the STE specification properly, a high professional standard is required.
B. A high level of professionalism requires the correct use of STE specifications.
C. In order to use the STE specifications appropriately, high professionalism is needed.
A. Clean the areas where there is hydraulic fluid leakage;
B. Clean the areas where there is hydraulic fluid seepage;
C. Clean the areas with wiper where there is hydraulic fluid leak;
A. The Federal Aviation Regulations require “maximum continuous power to be used during airframe and engine combination certification to show obedience with certain criteria."
B. Federal aviation regulations require “maximum continuing power to be used during the certifying of the airframe and engine to meet certain criteria."
C. Federal aviation regulations， in combination of airframe and engine certification process， the use of “maximum continuous power"， are used to show compliance with certain standards.
A. 当单向活门打开时,压力降低。
B. 当释压活门打开时,压力增加。
C. 当释压活门打开时,压力降低。
A. The Continuing Airworthiness Program Inspection number is also provided above the page and is the CAP chapter number.
B. The Continuing Airworthiness Program Inspection number is also displayed at the bottom of the page and is the CAP section number.
C. The Continuing Airworthiness Program Inspection Code is also showed under the page and is the CAP item number.
A. The actuator travel is limited by the stroke of surface
B. The actuator move is limited by the move of surface
C. The actuator travel is limited by the move of surface
A. Turn ADIF 1 to unknown frequency.
B. Tune ADF 1 to a known frequency.
C. Tune VOR 1 to a known channel.
A. 驾驶舱是指地板上方、前方乘客隔板和前方压力舱顶之间的舱室
B. 驾驶舱是指地板上方、前方乘客隔板之间以及前部压力舱顶上方的舱室
C. 驾驶舱是指地板前部、前方机组隔板和前方压力舱顶之间的舱室
A. This task contains guidance for the removal of the air pressure filter assembly.
B. This task is to repair the air pressure filter assembly.
C. This task lists tools and materials for the removal of the air pressure filter assembly.
