A、 检查损伤
B、 寻找损伤
C、 看到损伤
答案:B
A、 检查损伤
B、 寻找损伤
C、 看到损伤
答案:B
A. Make an enter in the logbook to show that you did the deactivation procedure.
B. Make an entry in the logbook to show that you did the deactivation procedure.
C. Make an entrance in the logbook to show that you did the activation procedure.
A. In either case, a chart will be included in showing standard symbols used throughout the manual.
B. In both cases, a figure will be contained to show the normal symptoms used in the whole manual.
C. Through-the handbook, a form shall be used to show the normal signs in these two cases.
A. It is possible that the installation changed the roation of the cable loom.
B. It is the installation that changed the routing of the cable loom.
C. The installation may have been alter the routing of the cable loom.
A. Obey the following procedure if the manufacturer provides you different instructions
B. If the manufacturer instructs you differently, the following procedure should be ignored
C. If the man ufacturer's instructions are different from the following procedure, obey the following procedure
A. DISCHARGES
B. EMITS
C. TRANSMITS
A. 制动系统用于降低滑行速度以及发动机停车状态下的停止螺旋桨旋转
B. 制动系统是用来减少停车时间或在发动机关车的情况下使螺旋桨停止转动
C. 在发动机低速运转或螺旋桨低速旋转时,制动系统能快速刹住
A. 关于在坏天气下停留的说明,请参阅第6章。
B. 关于怎样在未知天气下停放的说明,请参阅第6章。
C. 关于如何在恶劣天气下停放的说明,请参阅第6章。
A. the NDT detect part’s defects and no damage caused by to the part.
B. the NDT can detect the defects on the surface of the part only.
C. Non destructive testing, NDT is a preventative maintenance test procedure that can detect hidden defects, but damage may cause to the part being inspected.
A. Basic control and operation information describing how the airplane components are controlled and how they operate, including any special procedures, and limitations that apply.
B. Basic control and operation information describing how the airplane components are controlled and operated, including any special procedures, and limitations that apply.
C. Basic control and operation information describing how the airplane components controll and operate, including any special procedures, and limitations that apply.
A. Some service reports are used to select items that are similar in application,design and loading to do the inspection.
B. Some service reports were used to select items that are similar in application design and downloading to do the check.
C. In order to do the inspection, some service reports used to choose programs similar in apply, design and loading.