2040. The disengage switchs are used to manually disengage the autothrottle system

A. Inspect and modify the unit can possible cause the replacement of the units required from this SB

B. After inspection and modification required from this SB, replacement of the unit may be not need because of decreasing possibility of cracks

C. After inspection and modification, Replace the unit because of possible cracks by the require of this SB

A. 接通液压时应确保手柄未接触止动点

B. 液压释压时,确保手柄未触碰到止动点

C. 使用液压时应确保控制手柄持续移动

A. Be patient while the door is opening.

B. Be aware of the door when it is opening.

C. Be careful while the door is opening.

A. If the sleeve is incorrectly attached, adjust it.

B. If the sleeve is badly attached, adjust it.

C. If the sleeve is wrong attached,adjust it.

A. Sudden changes in temperature can adjust the internal logic.

B. The internal logic adjusts to sudden changes in temperature.

C. The internal logic can be adjusted by sudden changes in temperature.

A. 对于特定飞机设计、操作或操纵特征的紧急情况,应提供安全操作所需的紧急程序和其他相关信息。

B. 对干特定飞机设计、操作或操纵特征的应急部件,应提供安全操作所需的紧急程序和其他关键信息。

C. 应提供安全操作所需的紧急程序和其他非正常信息,这些信息对应于不同的特定飞机设计、操作或操纵特征的紧急情况。

A. PI上显示完成数据复制所需的剩余时间。

B. PI显示的是复制数据所需要的时间。

C. PI上显示剩余时间以便完成数据的复制。

A. 对所有维修过的产品进行全面检查。

B. 对所有维修过的产品进行仔细检查。

C. 对所有维修过的产品进行初始检查。

A. 结合导航信息以计算飞机地理位置的系统部分,包括航道计算机等。

B. 对比导航信息以计算飞机地理位置的系统部分,包括航道计算机等。

C. 参考导航信息以计算飞机相对位置的系统部分,包括航道计算机等。

A. The maximum distance between the plate edge and the frame is inferior to 0.05mm.

B. The clearance between the boundary of the panel and the bay can not exceed 0.05mm.

C. The distance between the edge of the panel and the partition must not be more than 0.05mm.