2108. The flow of systems shall be presented in patterned shading and by having a minimum of turns in the lines

A. 这两个小组探索了现有的受控语言,并研究了一些维护手册中的文本。结果证实单一语言是必要的。

B. 这两个小组分析了现有的可控语言,并研究了一些维护手册中的文本。结果证实简单的语言是必要的。

C. 这两个小组研究了现有的受控语言,并调查了一些维护手册中的文本。结果证实简化的语言是必要的。

A. 勤务氧气前,停止所有的加放燃油,液压系统的所有维修,以及所有使用易燃材料的程序,如清洁和除冰材料。

B. 充氧前,停止所有加油,修理燃油和液压系统,以及所有使用易炸材料的程序如清洁和除冰液。

C. 充氧前,停止所有加油,燃油和液压系统的所有维修,以及所有使用易燃材料的程序如清洁和除冰材料。

A. Calculate the quality of fuel and the number of shims that are necessary

B. Calculate the quantity of fuel and the number of shims that are necessary

C. Calibrate the quantity of fuel and the number of shims that are necessary

A. In certain circumstances, cleaning the connector or replacing the IDG seems to solve the problem, but the messages will appear again later.

B. Sometimes, cleaning the connector or replacing the IDG seems to settle the problem, but the message will reappear occasionally.

C. Sometimes, sterilizing the connector or renewing the IDG seems to resolve the problem, but the message will occur later.

A. 经常清洗毛刷/棉布以防造成划痕。

B. 经常清洗毛刷/海绵以防造成划痕。

C. 经常清洗毛刷/棉布以防造成污染。

A. 列出只是示例的技术名称。不需要列出所有可能的技术名称。

B. 列出的技术名称是唯一的示例。这个包括所有可能的技术名称列表并不完整

C. 列出的技术名称只是示例。该列表没有完整地列出所有可能的技术名称。

A. The rules containing in this specification shall provide a guide to the formatting, type and method of all present documents in the manufacturer＇s maintenance manual.

B. The rules in this specification are served as a guide for the format style and way of representation for all materials contained in manufacturer＇s maintenance manual.

C. The rules contained in this specification shall serve as guides for format, style and method of presentation for all material included in maintenance manuals prepared by manufacturers.

A. 调整卡箍直到有足够的摩擦力使其保持在原位。

B. 调整卡箍直到有足够的空间使其保持在原位。

C. 调整螺杆直到有足够的摩擦力使其保持在原位。

A. Perform check to see if there are traces of corrosion around the drain holes.

B. Check the drain holes for signs of corrosion.

C. Check the area surrounding the drain holes for signs of contamination.

A. Disassemble the bypass valve and the dump valve together.

B. Decompose the bypass valve and the dump valve at the same time.

C. Disassemble the bypass valve and the dump valve at the same time.