2124. There is no indication of single loop operation in the flight compartment until you do the OVHT/FIRE test

A. Check all parts with clear defects in accordance with standard industry practices.

B. Check all parts for visible defects in accordance with standard industry practices.

C. Check all parts for serious defects in accordance with standard industry practices.

A. Maneuvering Speed is the maximum speed what required of full uncommitted aerodynamic control will not exceed the airplane.

B. Maneuvering Speed is the largest speed that the aerodynamic application by the full available control will not cause the aircraft overexert.

C. Maneuvering Speed is the maximum speed at which application of full available aerodynamic control will not overstress the airplane.

A. 燃油流量解算器测量流入燃油旋流器和燃油喷嘴的总质量。

B. 燃油流量传感器测量流入燃油总管和燃油喷嘴的燃油质量流量。

C. 燃油流量变送器测量流入燃油总管和燃油喷嘴的总流量。

A. 当释放液压时活门按顺序打开

B. 当液压被释放后,顺序活门移动到开位。

C. 当液压增压时,要按顺序移动来打开活门。

A. Maneuvering speed is the lowest speed at which the flight controls can be fully deflected without damage to the airplane structure.

B. Maneuvering speed is the maximum speed at which the flight controls can be fully deflected and no structure damage occurs.

C. Maneuvering speed is the maximum speed at which the aircraft can fly without damage to the airplane structure.

A. The removal of the piston is involved in the steps

B. The removal of the piston is not included in the procedure

C. The procedure eliminates the piston

A. 对非FAA批准的飞机,其声明要写在飞行手册中。

B. 对非FAA批准的飞机飞行手册,做如下声明。

C. 在非FAA批准的飞行手册中要包括以下声明

A. It is fine to use alternative materials

B. It is forbidden to use alternative materials

C. The alternative materials are not unserviceable

A. 在填充氧气瓶时,必须强制遵守氧气瓶更换程序。

B. 在填充氧气瓶时,必须强制遵守氧气瓶安全操作程序。

C. 在填充氧气瓶时,必须强制遵守氧气瓶添充程序。

A. 在每个部分下面,按故障的等级,列出可能引起问题的原因。

B. 在每个部分下面,按概率的顺序,列出可能引起问题的部件的状况。

C. 在每个部分下面,按部件工作的顺序,列出引起问题的每一个条件。