A、 留在部件上的溶剂可能导致腐蚀。
B、 留在部件上的密封胶能够引起侵蚀。
C、 部件表面的颗粒可能引起磨损。
答案:A
A、 留在部件上的溶剂可能导致腐蚀。
B、 留在部件上的密封胶能够引起侵蚀。
C、 部件表面的颗粒可能引起磨损。
答案:A
A. Maneuvering speed is the lowest speed at which the flight controls can be fully deflected without damage to the airplane structure.
B. Maneuvering speed is the maximum speed at which the flight controls can be fully deflected and no structure damage occurs.
C. Maneuvering speed is the maximum speed at which the aircraft can fly without damage to the airplane structure.
A. When the movement of input rod is ranged from 5 to 10 mm, measure the piston retraction.
B. When the input lever is between 5 and 10 mm, measure the piston extension.
C. When the interval of input shaft changes between 5 and 10 mm, measure the expansion of the piston.
A. There are remarks directly below the maintenance/overhaul section, extended from left to the right side.
B. You can find the comments which extends from left to right margins in the repair/modification section below.
C. The comments extended from right to left margins are located in the repair/alternation section.
A. 长的
B. 小的
C. 短的
A. You can see the oil level on the sight gauge.
B. You can see the oil quantity on the sight gauge.
C. You can see the oil level on the sight indicator.
A. The time between two inspections is not the same on different types of aircraft.
B. The time of inspections is the same on the same type of aircraft.
C. The duration of inspections is depending on the types of aircraft.
A. The alone and independent systems used to provide illumination in case of primary electrical power failure. Includes items such as inertia flashlights, lanterns, etc.
B. The separate and independent subsystems used to provide illumination in case of primary electrical power failure. Includes items such as inertia flashlights, lanterns, etc.
C. The separate and independent subsystems used to provide lighting in case of primary electrical power failure. Includes items such as inertia flashlights, lanterns, etc.
A. This specification Meets industry standards for scope of material, arrangement, nomenclature and definitions.
B. This specification Meets airworthy standards for scope of material, arrangement, nomenclature and definitions.
C. This specification Meets industry standards for scope of consumable, arrangement, nomenclature and definitions.
A. 如果大型插图水平放置,索引批注和标题最好是径向放置
B. 尽管大型插图水平放置,索引批注和标题最好是垂直放置
C. 因为大型插图横向放置,索引批注和标题最好是垂直放置
A. GO
B. ENTER
C. FALL