2213. Calibrated Airspeed means the indicated speed of an aircraft, corrected for position and instrument error Calibrated airspeed is equal to true airspeed in standard atmosphere at sea level

A. All of operations, there are key items that are important to the job.

B. In very few operations there are key items that are significant to the job.

C. In most operations there are key items that are significant to the job.

A. State structure of air frame, wings and tail.

B. Present structure of air frame, wings and empennage.

C. Describe structure of fuselage, wings, and empennage.

A. If the wheel temperature reaches as high as 177 deg, the core of safety plug shears off and the tire slips.

B. If the wheel temperature increases to more than 177 deg, the core of the fusible plug melts and the tire deflates.

C. The core of the filter element melts once the wheel temperature is above 177 deg, causing the tire to deflate.

A. 将封圈安装在锥形轴承的凹槽里

B. 将封圈安装在圆形轴承的凹槽里

C. 将封圈安装在球形轴承的凹槽里

A. 确保发动机排气区周围有安全围挡。

B. 确保发动机进气区前面有安全界线。

C. 确保工程排气区前面有安全阻碍。

A. 机械动力输出装置来驱动发动机安装的齿轮箱,齿轮,密封件,泵等。

B. 发动机安装的齿轮箱,齿轮,密封件,泵等附件由机械动力输出装置来驱动。

C. 机械动力输出装置来驱动附件。包括发动机安装的齿轮箱,齿轮,密封件,泵等。

A. The CAP hardly tends to exchange or replace any part of the related airplane maintenance manual.

B. The CAP prefers to vary or be instead of any part of the relevant aircraft maintenance manual.

C. Any part of the applicative aircraft maintenance manual cannot be changed or replaced by the CAP.

A. Schematics must be readable to a normal visioned person, so legends, symbols, devices, codes, etc., should be of sufficient size. The schematic diagram should be designed to turn over the page when the content is necessary.

B. The schematic diagram must be of sufficient size that legends, symbols, devices, codes, etc., are readable by persons with normal vision. Turn-page schematic diagrams shall be avoided to the extent practical.

C. The schematics, symbols, devices, codes, etc., must be legible, so people with normal vision should avoid turning the schematic pages as much as possible.

A. 密封组件发现缺陷

B. 密封胶发现缺陷

C. 封严发现缺失

A. 在快速齿轮上涂抹润滑脂。

B. 按照紧固件来申请润滑脂。

C. 给紧固件涂上油脂。