2227. Replenish spare bulbs container as required

A. The removal step in the replacement of hydraulic reservoir might break down into such following key items.

B. The installation step in the replacement of pneumatic reservoir might be split up into such key items that follow.

C. The removal step in the replacement of hydraulic pump might be divided into the above-mentioned key items.

A. A part of the system used to eliminate or prevent de-ice on all airfoil surfaces.

B. All airfoil surfaces are part of the system used to eliminate or prevent icing.

C. The system part of all airfoil surface icing is used to eliminate or prevent it.

A. 只有经过授权的人员方可以留在该区域

B. 只有经过改装的人员方可以留在该区域

C. 只有经过检验的人员方可以留在该区域

A. Runway light connection resistance calibration.

B. Calibration of the resistance of the runway light connection.

C. Calibration of the the runway light connection resistance.

A. 请参阅相应的制造商维修手册

B. 请参阅授权的制造商维修手册

C. 请参阅相应的供货维修手册

A. 当有一个来自自动驾驶的升降舵偏转指令且偏转不超过配平限制的时间而持续时,自动驾驶安定面配平指令会发出。

B. 当有一个来自自动驾驶的升降舵偏转指令且偏转超过了配平限度并长时间持续时,自动驾驶安定面配平指令会发出。

C. 当有一个来自自动驾驶的方向舵偏转指令且偏转超过了配平限度并长时间持续时,自动驾驶安定面配平指令会发出。

A. This Section of the Pilot＇s Operating Handbook including only those limitations required by regulation or necessary for safe operation of the airplane is approved by the regulatory authority.

B. This Section of the Pilots Operating Handbook shall include only two kinds of limitations. One is the limitations required by regulation The other is the limitations necessary for safe operation of the airplane and approved by the regulatory authority.

C. Those limitations required by regulation contained in this Section of the Pilot＇s Operating Handbook are approved by the regulatory authority, it＇s necessary for safe operation of the airplane.

A. System test contain part of the adjustment specifications and tolerances.

B. System test is required to maintain a unit performance at its lowest design specifications.

C. System test may cover other tests, such as operational test.

A. 在作动控制之前请不要连接锁定机构。

B. 在操作控制杆之前请断开锁销。

C. 在移动控制杆之前请解锁权。

A. Torsion the plug to the receptacle

B. Mate the plug to the receptacle

C. Connect the plug to the receptacle