2240. Identify the component with a code to help you to install it again correctly

A. If the instrument fails to respond, do a test.

B. If the instrument does not operate correctly, do a test

C. If the instrument does work correctly ,do a test.

A. The EEC process simulation signal from the high pressure turbine.

B. The EEC receive analog signal from high pressure turbine.

C. The high pressure turbine send discrete signal to EEC.

A. Get the approval of the design authority whatever it is necessary to change the repair scheme.

B. Change the repair scheme, until getting the approval of the design authority.

C. If it is necessary to change the repair scheme, get the approval of the design authority.

A. “TO/GA” shows on the PFD all the time.

B. “TO/GA” are shown on the PDF if the roll and pitch is active.

C. “TO/GA” shows on the PFD as the active mode for roll and yaw.

A. Do not replace the self-locking nuts with plain nuts.

B. Do not use a general fastener instead of a self-locking one.

C. The general purpose nut is interchangeable with the self-locking nut.

A. The flow of the system can be traced as easily as possible through the arrangement of the diagram.

B. A reasonable distribution of the diagram helps to duplicate the flow of the system with least difficulties.

C. The diagram shall be arranged in order to draw a minimum flow of the system without effort.

A. The wheel chocks must be put forward of the wheels while the aircraft is on the ramp.

B. If the aircraft must be parked on the apron, put the wooden blocks in front of the wheels.

C. If you must park the aircraft on a slope, make sure that wheel chocks are in front of the wheels.

A. WORKS

B. OPERATES

C. MAKES

A. Some chemicals can not be used if they are well kept.

B. Some chemicals must be well kept so that they can be used.

C. Some chemicals must be well kept as long as they can ben used.

A. Troubleshooting: messages explaining possible failures and corrective measures must be covered in this handbook.

B. You may find the troubleshooting information about the malfunctions and the related measures for them in this manual.

C. Troubleshooting information describing probable malfunctions and the remedial actions of those malfunctions shell be provided in this manual.