A、 The maximum distance between the plate edge and the frame is inferior to 0.05mm.
B、 The clearance between the boundary of the panel and the bay can not exceed 0.05mm.
C、 The distance between the edge of the panel and the partition must not be more than 0.05mm.
答案:C
A、 The maximum distance between the plate edge and the frame is inferior to 0.05mm.
B、 The clearance between the boundary of the panel and the bay can not exceed 0.05mm.
C、 The distance between the edge of the panel and the partition must not be more than 0.05mm.
答案:C
A. 每条指令用一句话写出,除非有两个或更多的动作。
B. 每句话仅写一条指令,除非有两个或更多的动作同时发生。
C. 每条指令除非有两个或更多的动作同时发生,否则仅用一句话写出。
A. Each of the two life vests located at L2 entry door flight crew station is damaged.
B. Each of the two life vests located at L2 entry door flight crew station is out of time limit.
C. Each of the two life vests located at L2 entry door flight crew station is out of service.
A. drink contaminated water.... must happen.
B. drink water free xxx, illness can occur.
C. Drink water with Xxx, you will be sick.
A. 所得数据用于确定是否应考虑将部件并入CAP。
B. 数据结果用于确定是否应考虑部件并入CAP。
C. 最终数据用于确定是否应考虑将部件并入CAP。
A. Remove the test cap between the Precooler Control Valve and the 3908 sensor on the control pressure sense line and ensure that there is air flowing out of the port.
B. From precooler control valve to 3908 sensor, remove the sense line test cap, make certain that the air flows from the test hub.
C. The purpose of the test cap removal from the Precooler Control Valve to the 3908 sensor is to guarantee that there is airflow at the test port.
A. This requires breaking down the work into logical steps or operations.
B. This requires a breakdown of the job into logical steps or operations.
C. This required breaking down of the job into logical steps or operations.
A. If you change this repair procedure, get approval of the Design Authority.
B. Any alteration to this repair procedure must have approval of the Design Authority.
C. To change this repair procedure,get agree of the Design Authority .
A. 将分隔标签平行放置,并用节号或标题或两者一起标记
B. 将分隔标签错开,并用节号或标题或两者起标记
C. 将分隔标签顺序放置,并用节号或标题或两者一起标记
A. If the engine appears to be heating, turn it off.
B. If the engine appears to be overheating, turn it off.
C. If you think the engine is too hot, turn the switch to off"'"
A. The accessories such as engine-mounted gear boxes, gears, seals, pumps, etc., are drived by mechanical power.
B. The mechanical power take-offs to drive engine-mounted gear boxes, gears, seals, pumps, etc.
C. The mechanical power take-offs to drive accessories. Includes items such as engine-mounted gear boxes, gears, seals, pumps, etc.