A、 Measure the Outside Air Temperature and the temperature in the cockpit with a thermometer.
B、 Do the Outside Air Temperature and the temperature in the cabin with a barometer.
C、 Measure the Surrounding Air Temperature and the temperature in the cockpit with a thermometer.
答案:A
A、 Measure the Outside Air Temperature and the temperature in the cockpit with a thermometer.
B、 Do the Outside Air Temperature and the temperature in the cabin with a barometer.
C、 Measure the Surrounding Air Temperature and the temperature in the cockpit with a thermometer.
答案:A
A. set the valve to fully closed position
B. set the valve to full closed position
C. set the valve to fully close position
A. Do not reach this speed with a given flap setting.
B. Do not exceed this speed with a give flap setting.
C. Do not exceed this speed with a given flap setting.
A. 螺柱的凹陷不得超过5mm
B. 螺柱的突起不得超过5mm
C. 螺纹的长度不得超过5mm
A. If the depth of a crack is 0.2 mm or less, reject the part.
B. If the width of a crack is more than 0.2 mm, reject the part.
C. If the depth of a crack is more than 0.2 mm, reject the part.
A. 本文件中的任何零件没有出版商的许可不得复制
B. 本文件中有任何一个部分是没有得到出版商许可的
C. 未经过出版商书面许可,本文件任何部分不得以任何形式复制
A. State structure of air frame, wings and tail.
B. Present structure of air frame, wings and empennage.
C. Describe structure of fuselage, wings, and empennage.
A. Apply the talcum powder in fuel leak area.
B. Apply the kathon in fuel leak area.
C. Apply the bubble solution in fuel leak area.
A. The lower washer comes into view during you pull the lower gear down
B. The lower seal comes into view when you pull the lower bearing down
C. The lower shim goes out of view while you pull the lower sheet down
A. 如果测试失败,应该根据困难决定修理的内容。
B. 如果测试结果不合格,应该根据故障决定修理的深度。
C. 如果测试结果失效,应该根据故障决定修理的难度。
A. Accumulate the thickness of the shim as follows: t=x-y.
B. Calculate the thickness of the shim as follows: t=x-y.
C. Calculate the width of the shim as follows: t=x-y.