467. The Continuing /Airworthiness Program Inspection Document ( ) is inspection data that, when combined with the operator＇s existing maintenance program, will help maintain the structural integrity and continued airworthiness of the ABC XXX Series airplanes

点击查看题目

2854. A hole of several inches in diameter may be cut in a piece of metal at a point where the metal is not needed for strength, and the edges of the hole are flanged to give it rigidity

点击查看题目

394. Soak the element for four hours

题目内容

(

单选题

)

手机预览

设备系统操作理论翻译

2301. Use an equivalent material if the specified one is not available

A、 Use the specified one if the equivalent material is not available.

B、 Use the available equivalent one if no material is specified.

C、 If you can not get the specified material, use an equivalent.

答案：C

相关题目

1611. 选择要增压的液压系统。

A. The pressurized hydraulic system is the best.

B. The selected hydraulic system needs to be pressurized.

C. Select the hydraulic system that you will pressurize.

点击查看答案

2560. When down, the cover act as a guard for the switch

A. 当朝下时,盖子起到保护开关的作用

B. 当朝下时,盖子作为开关的一种保护

C. 当打开时,盖子就起到保护开关的作用

点击查看答案

1472. The exterior covering of the nacelle Including access covers, cowling and doublers

A. 发动机舱的外部覆盖物,包括检修盖板,整流罩和固定件。

B. 发动机的整流罩,包括检修盖板,整流罩和加强件。

C. 发动机舱的外部覆盖物,包括检修盖板,整流罩和加强件。

点击查看答案

2971. Air Inlet Section of the engine through which the air enters the compressor section Includes items such as guide vanes, shrouds, cases, etc

A. The air Inlet Section is adjacent to the compressor section. Includes guide vanes, shrouds, cases, etc.

B. After the air goes through the air Inlet Section, it enters the turbine section

C. The compressor section includes items such as inlet guide vanes, shrouds, cases, etc.

点击查看答案

3009. 确保螺栓上的标记与手柄上的标记水平

A. Make sure that the mark on the bolt is aligned with the mark on the handle.

B. Make sure that the mark on the bolt is level with the mark on the handle.

C. Make sure that the mark on the bolt is parallel to the mark on the handle.

点击查看答案

1099. If it is necessary( )the cable tension more, use the turnbuckle

A. to decrease

B. decreased

C. decreasing

点击查看答案

696. Use a drill bit that is maximum 45 mm long

A. 使用最大长度为45mm的钻头。

B. 使用最少长度为45mm的钻头。

C. 使用最坚硬长度为45mm的钻头。

点击查看答案

A. 如果与营运人现有的维修方案相结合,持续适航方案检查文档(CAP)是一种检查资料,将有助于保持ABC XXX系列飞机的结构稳定性和持续适航性。

B. 持续适航方案检查文档(CAP)是一种检查资料,与营运人现有的维修方案相结合,将有助于保持ABC XXX系列飞机的结构完整性和持续适航性。

C. 持续适航方案检查文档(CAP)是一种与营运人现有的维修方案相结合检查资料,将有助于保持ABC XXX系列飞机的结构辨识度和持续适航性。

点击查看答案

2854. A hole of several inches in diameter may be cut in a piece of metal at a point where the metal is not needed for strength, and the edges of the hole are flanged to give it rigidity

A. 在一块不需要承力的金属上,可以在某一点处切割一个直径为几英寸的孔,孔的周围用法兰连接,使其具有刚度

B. 在一块金属上,可以在不需要承力的某一点处切割一个直径为数英寸的孔,孔的边缘折边可以使其具有刚性

C. 在一块不需要承力的金属上,可以在一处切割几个直径为数英寸的孔,孔的边缘用凸缘连接,使其产生刚性

点击查看答案

394. Soak the element for four hours

A. 浸泡元件四个小时。

B. 冲洗元件四个小时。

C. 打磨元件四个小时。

点击查看答案