A、 The turbine rotates by a reduction gear gives tolerance to the HP shaft, so it can drive the engine and the aircraft accessories.
B、 The turbine turning through a reduction gear, applies a torque to the HP shaft, thus driving the engine and the aircraft components.
C、 The turbine turning through a reduction gear, applies a torque to the HP shaft. thus driving the engine and the aircraft accessories.
答案：C
A、 The turbine rotates by a reduction gear gives tolerance to the HP shaft, so it can drive the engine and the aircraft accessories.
B、 The turbine turning through a reduction gear, applies a torque to the HP shaft, thus driving the engine and the aircraft components.
C、 The turbine turning through a reduction gear, applies a torque to the HP shaft. thus driving the engine and the aircraft accessories.
答案：C
A. 用于指示低压的压力计使用更灵活的管子,更容易展开和卷绕
B. 用于指示较低压力的仪表使用更易弯曲的管子,线圈更易散开和缠绕。
C. 用于指示较低压力的压力表使用的软管更加柔软,可以随时解开和盘绕。
A. CHECK THE CASTING FOR CORROSION
B. EXAMINE THE CASTING FOR CORROSION
C. MEASURE THE CASTING FOR CORROSION
A. Make certain that the oil level is audible through the sight gauge;
B. Make certain that the oil level is visible through the sight gauge;
C. Make certain that the oil level is touchable through the sight gauge;
A. The section of the engine through which the air enters the compressor section, guide vanes, shrouds and cases, etc.
B. The section of the engine through which the air enters the compressor section. Includes items such as guide vanes, shrouds, cases, etc.
C. The section of the engine through which the air enters the compressor section. But excludes items such as guide vanes, shrouds, cases, etc.
A. Perform these checks immediately.
B. Perform these checks without any schedule.
C. Do these checks regularly.
A. The cabin is behind flight compartment after partition and forward of pressure dome above the floor;
B. The cabin is compartment that between the forward passenger partition and the forward pressure dome, beneath the floor;
C. The cabin is after the forward passenger partition and in front of the forward pressure dome, above the floor.
A. 将旋转开关设置为输入
B. 将旋转开关设置为输出
C. 将活动开关设置为输入
A. 制造商报告任何发现的裂纹。
B. 向制造商报告任何发现的裂纹。
C. 制造商记录任何发现的裂纹。
A. magnesium belongs to the combustible materials of Class D fire.
B. Hydraulic fluid, oil and fuel belong to the combustible materials of Class D fire.
C. Paper and wood belong to the combustible materials of Class D fire.
A. Setting cable tension, flight control surfaces travel limits and stops are the main tasks of rigging.
B. Cable tension set, flight controls travel limits adjustment and travel stops set are the rigging procedures
C. Rigging involves setting cable tension, adjusting travel limits of flight controls, and setting travel stops.
