A、 浸泡组件四小时
B、 冲洗组件四小时
C、 打磨组件四小时
答案：A
A、 浸泡组件四小时
B、 冲洗组件四小时
C、 打磨组件四小时
答案：A
A. 制造商应该在适当的地方,如办公室或部门,联系获得超出手册以外其他关于特殊修理和大修的信息。
B. 制造商应该在适当的地方,如办公室或部门,以联系来获得手册中没有涵盖的重要修理或者大修信息。
C. 制造商应该在适当的地方包括办公室或部门,以联系到来获得在维修手册中没有涵盖的特殊修理或者大修的信息。
A. 组织维修的维修记录应当根据如下规定:维修工作应当保证记录一致。
B. 维修单位的维修记录应当跟随下列规定:完整的维护工作应当保证记录。
C. 维修单位的维修记录应当符合下列规定:维修工作应当保证记录完整。
A. Make sure that you can see all components clearly.
B. Make sure that all components are in position.
C. Make sure that all components are in good condition.
A. Cycle the system and cool the parts.
B. Water is cycled in the system and cools the system.
C. Oil is cycled in the system and heats the system..
A. This system does not exceed the normal channels of communication for items not included in the CAP.
B. For items not included in the CAP, this system does not take the place of the normal channels of communication.
C. For items not mentioned in the CAP, his system does not occupy the normal channels of communication.
A. 勤务包括诸如减震支柱的充气,控制系统的润滑,饮用水系统的消毒等。
B. 勤务包括诸如减震支柱的充放气,控制系统的润滑,饮用水系统清洁等。
C. 勤务包括诸如减震支柱的充放气,控制系统的润滑,饮用水系统的更换等。
A. 将大量压缩空气从气源输送到其他系统,如环境控制、除冰等连接点的组件和部件(管道和活门)。
B. 将高压空气从气源输送到其他系统,如环境控制、除冰等连接点的组件和部件(管道和活门)。
C. 将大量压缩空气从引气管路输送到其他系统,如环境控制、除冰等连接点的组件和部件(管道和活门)。
A. 记录对蒙皮表面进行的所有修理
B. 记录对蒙皮封严进行的所有修理。
C. 记录对蒙皮损伤进行的所有处理。
A. If the parking apron is not level, make sure the wheel chocks set correctly
B. When the aircraft parked on a slope, must set parking brake
C. If the aircraft is parked on a slope, set the chocks on main wheel immediately
A. The engine air supply components are all located on the left engine.
B. If you want to be access to the components of engine air supply, you need to open the left fan cowl and thrust reverser.
C. If you want to be access to the components of engine air supply, you need to open both the left and right fan cowls and thrust reverser.
