A、 If you decide not to replace the current component, monitor its temperature for most of 15 cycles.
B、 If your decision is not to replace the unit, monitor its temperature for a minimum of 15 cycles.
C、 If you decide not to replace the existing unit, watch its temperature for at least 15 cycles.
答案:B
A、 If you decide not to replace the current component, monitor its temperature for most of 15 cycles.
B、 If your decision is not to replace the unit, monitor its temperature for a minimum of 15 cycles.
C、 If you decide not to replace the existing unit, watch its temperature for at least 15 cycles.
答案:B
A. When the smoke control relay R648 is powered, it gives 28v dc to activate the supply system control interrupt relay R645.
B. As the smoke control relay R648 is connected, 28v dc is supplied to the supply system control interrupt relay R645.
C. When the smoke control relay R648 has power, it needs 28v dc to start the supply system control interrupt relay R645.
A. 饮用水系统每三天至少放一次水,或使用一次。
B. 水系统每三天被排放和使用一次
C. 饮用水系统每三天至少放一次水并使用一次。
A. That portion of the system that automatically controls the position of the lever to properly blend power plant with slat position and aircraft pitch attitude during landing/approach and go around procedures. This includes engaging, sensing, computing, amplifying, controlling, actuating and warning devices such as amplifiers, computers, servos, limit switches, clutches, gear boxes, warning lights, etc.
B. That portion of the system that automatically controls the position of the throttles to properly mix engine power with flap position and aircraft pitch altitude during landing/approach and takeoff procedures. This includes engaging, sensing, computing, amplifying, controlling, actuating and warning devices such as amplifiers, computers, servos, limit switches, clutches, gear boxes, warning lights, etc.
C. That portion of the system that automatically controls the position of the throttles to properly blend engine power with flap position and aircraft pitch attitude during landing/approach and go around procedures. This includes engaging, sensing, computing, amplifying, controlling, actuating and warning devices such as amplifiers, computers, servos, limit switches, clutches, gear boxes, warning lights, etc.
A. Accelerate Stop Distance is the distance required to accelerate an airplane to a specified speed and, assuming failure of an engine at the instant that speed is attained, to bring the airplane to a stop.
B. Accelerated stop distance refers to the distance required to promote an aircraft to a stipulated speed, assuming that engine failed occurs at that speed and the aircraft stops flying.
C. Accelerating stop distance is defined as the distance requiring to speed up an aircraft to a specific speed, assuming that engine failed at that speed and the aircraft stops flying.
A. The mechanic removed the cable roller and examined the surrounded area in detail. No other defects were found.
B. The mechanic removes the cable rotor and examines the adjacent area in detail. No other defects are noted.
C. The mechanic removed pulley and inspected the surrounding area in detail with no other defects found.
A. 将O形环安装在锥形轴承的内部凹槽中
B. 将O形环安装在圆柱形轴承的内部凹槽中
C. 将O环安装在球形轴承的内部凹槽中
A. Decide which hydraulic system you will pressurize.
B. The pressurized hydraulic system is the best.
C. Check the hydraulic system that you will pressurize.
A. Vent pressure
B. Let pressure free
C. Make pressure down
A. 在驾驶舱放置警告标识,同时告知相关人员不要操作飞控系统。
B. 在驾驶舱放置警告标识,告知人员不要操作飞控舵面。
C. 在驾驶舱放置警告标识以告知无需操作飞控舵面的人员。
A. If the temperature values are under the eligible limits, decrease the power.
B. Decrease the power as long as the temperature values are less than the certified limits.
C. If the temperature values are likely to be more than the allowed limits, decrease the power.