A、 Dry all metal parts that have different metal inserts or deep blind holes in an oven at 225 to 275℉ (107 to 135℃) for a minimum of one hour.
B、 Put all different metal inserts or deep blind holes metal parts in an oven at 225 to 275℉ (107 to 135℃) for a maximum of one hour.
C、 All metal parts that have different metal inserts or deep blind holes are dry in an oven of 225 to 275℉ (107 to 135℃) for a minimum of one hour.
答案：A
A、 Dry all metal parts that have different metal inserts or deep blind holes in an oven at 225 to 275℉ (107 to 135℃) for a minimum of one hour.
B、 Put all different metal inserts or deep blind holes metal parts in an oven at 225 to 275℉ (107 to 135℃) for a maximum of one hour.
C、 All metal parts that have different metal inserts or deep blind holes are dry in an oven of 225 to 275℉ (107 to 135℃) for a minimum of one hour.
答案：A
A. 在两个点之间做标记
B. 在两条线的交点处钻孔
C. 检查交汇处的孔
A. 始终遵守如下保持电线处于良好状况的法规
B. 始终遵守预防措施,然后保持电线处子良好状况
C. 始终遵守如下预防措施以保持电线处于良好状况
A. Turn the repair patch align the surface structure and mark the cut out.
B. Rotate the repair patch to mark the incision for repair.
C. Open the repair picture to align the structural surface and mark the cut out.
A. Stabilizers: The horizontal and vertical stabilizers include the structure of the elevator and rudder.
B. Stabilizer: Includes elevator and rudder and horizontal and vertical stabilizers.
C. Stabilizer: Includes elevator and rudder and vertical stabilizer.
A. Clean the area where you applied the sealant.
B. Clean the area that you attach the fluid.
C. Clean the area which you add the agent.
A. 发动机中空气和燃油混合并燃烧的部分。包括项目,如火焰筒,壳体等。
B. 发动机中空气和燃油混合并在火焰筒和壳体内燃烧。
C. 发动机中空气和燃油混合并燃烧的部分。包括火焰筒,壳体。
A. Set the suitable L PACK switch or the R PACK switch to the AUTO position. L PACK switch and the R PACK switch are on the p5-10 air conditioning panel.
B. Set L PACK Switch or R PACK Switch on Suitable p5-10 air conditioner panel to AUTO position.
C. Set the applicable L PACK switch or the R PACK switch to the AUTO position. The R PACK switch is on the p5-10 air conditioning panel.
A. the blade angle of propeller is the angle between blade face and rotation plane.
B. the blade angle of propeller is the angle between blade face and relative wind.
C. the blade angle of propeller is always acute angle no matter when the working status of the propeller.
A. There is different fuel load on each side of the aircraft centerline.
B. Avoid different fuel load on each side of the aircraft centerline.
C. Make sure that the fuel load on left side of the aircraft centerline is not same with the one on right side.
A. The aileron channel receives its input signal from a transmitter
B. The aileron channel receives its input signal from a transceiver
C. The aileron channel receives its input signal from a receiver
