A、 Setting cable tension, flight control surfaces travel limits and stops are the main tasks of rigging.
B、 Cable tension set, flight controls travel limits adjustment and travel stops set are the rigging procedures
C、 Rigging involves setting cable tension, adjusting travel limits of flight controls, and setting travel stops.
答案：C
A、 Setting cable tension, flight control surfaces travel limits and stops are the main tasks of rigging.
B、 Cable tension set, flight controls travel limits adjustment and travel stops set are the rigging procedures
C、 Rigging involves setting cable tension, adjusting travel limits of flight controls, and setting travel stops.
答案：C
A. 确保能用耳机听到飞行语音记录。
B. 确保能通过耳机与客舱进行对话。
C. 确保能在耳机里听到驾驶舱的对话。
A. It is stated int the document that you should inform the FAA about the alterations you＇ll perform on the airplane to insure the airworthiness of the airplane.
B. The document says that the FAA should be involved in any alterations on airplane so to insure that the airplane will not violate any airworthiness.
C. The document sets forth that you should contact the FAA before any alterations on airplane to make sure that the airplane is airworthy continuously.
A. 文本应尽可能简单易懂。
B. 文本可以尽量简单易懂。
C. 文本应该尽可能简明扼要。
A. 指示器显示储压器已满。
B. 仪表显示油箱已满
C. 指示器显示油箱已满
A. An Airplane Weighing Form" shall be included in each handbook and the form shall contain an airplane side view that shows the location of weighing points (using jacking points or landing gear) relative to the datum line."
B. Each handbook shall provide an aircraft side view that is included in an Airplane Weighing Form" to show the position of weighing points (using jacking points or landing gear) related to the datum line."
C. An airplane three view that shows the weighing point (using jacking points or undercarriage) relative to the datum line shall be excluded in an Airplane Weighing Form" of each handbook."
A. 如果在平时使用中,大家更爱使用全称的话,其缩写也应标注在标题的括号内。
B. 如果在习惯用法中,相对于全称更倾向使用缩写的话,则该缩写也应包括在标题的括号内。
C. 应该将缩写包含在标题的括号内,如果平常更喜欢使用缩写而不是全称的话。
A. Replace broken clamp with new clamp with reference to standard practices and AMM and relieve rubbing with the bundle at floor bar cut at body station 360.
B. Replaced broken clamp with a new clamp diminishing rubbing at floor beam cutout at body station 360 with reference to standard practices and AMM.
C. According to the standard practices and AMM, the damaged clamp at the body station360 was replaced to eliminate the friction between the wire bundle and the cutout of the floor beam at this place.
A. 喷油孔故障会导致不正确的操作。
B. 喷油孔堵塞会导致不正确的信息。
C. 喷油孔堵塞会导致不正确的操作。
A. The procedure of attaching the cable is different from that in detail C on Fig.4
B. See detail C on Fig.4 for another way of attaching the cable
C. You can find a different diagram of the cable in detail C on Fig.4
A. Supervise the display of audio altimeter.
B. Monitor the media altitude meter display.
C. Monitor the radio altimeter indicator.
