2605. Scratches can prevent the free movement of the piston in the sleeve

A. 在这个姿态中,着陆模式在偏航轴提供跑道中心线对准,在俯仰轴提供改平。

B. 在这个姿态,着陆模式在偏航轴提供跑道中心线对准,在俯仰轴提供抬头姿态。

C. 在这个高度,着陆模式在偏航轴提供跑道中心线对准,在俯仰轴提供改平。

A. Return oil to the scavenge pump.

B. The pump provides oil for the tank.

C. The scavenge pump returns oil to the tank.

A. 这会导致组件的机械性能的恶化。

B. 这会导致组件的机械部件的变形。

C. 这会导致组件的机械装置碰撞。

A. Replace the PTU check valve

B. Interchange the PTU one way valve.

C. Change the PTU return valve

A. Do not enter the engine test area without approval.

B. Do not make entrance to the engine test area without approval.

C. Do not go into the engine test area without approval.

A. When the airplane, engine and component manufacturers prepare Continuing Airworthiness Program Inspection Documents(which may also be called Continuing Airworthiness Programs or CAPs),they can consult this Specification as a guidance.

B. General Aviation Manufacturers Association Built up this Specification to guide the airplane, engine and component manufacturers to prepare Continuing Airworthiness Program Inspection Documents(which may also be called Continuing Airworthiness Programs or CAPs). All types of general aviation airplanes and components certified under the applicable Federal Aviation Regulations may be utilized to CAPs

C. General Aviation Manufacturers Association Built up this Specification to guide the airplane, engine and component manufacturers to prepare Continuing Airworthiness Program Inspection Documents(which may also be called Continuing Airworthiness Programs or CAPs). All types of general aviation airplanes and components certified under the applicable Federal Aviation Regulations may prepare CAPs

A. 飞机保持适航和安全飞行的基础是由制造商决定的,当然也需要定期检查和维护。

B. 按照飞机制造商的要求运行飞机,辅以定期维护和检查可以保持飞机的适航性。

C. 按照制造商的意图使用飞机,结合良好的检查和维修实践,形成了确保飞机保持适航和安全操作的基础。

A. Clean the plastic surfaces that are transparent.

B. Clean the plastic surfaces that are not transparent.

C. Clean the plastic surfaces that are dirty.

A. If the valve is the source of the fuel leak, discard the valve seals and install new ones.

B. If the fuel leaks out of the valve, reinstall the valve seals.

C. If the fuel leak flows towards the valve, discard the valve seals and install new ones.

A. Blind rivet is a special rivet used in a sheet metal structure that can be installed when either side of the metal can get access to.

B. Blind rivet is a special rivet used in a sheet metal structure that can be installed when neither side of the metal can get access to.

C. Blind rivet is used in a sheet metal structure because there is not enough space to both sides of the metal.